Kadey Krogen 42 mast step removal
- Thread starter APhilipps
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Yes, just the six bolts. I'd remove the mast first. It looks like you have a enough slack in the wires to move the mast to the side. I used multiple wedges and lots of tape around the perimeter to protect the fiberglass. I replaced the plywood pieces under the mast pad since they were water soaked and soft. Marine plywood with the edges sealed with epoxy cut to fill the pad were epoxied into the base.. The roof isn't perfectly flat so I used thin HDPE pieces to shim the base. Any good polyurethane caulk will work. You don't need the strength of 5200 to re-caulk the base since you have 6 bolts. Good luck!
1987 KK42 Hull# 120
1987 KK42 Hull# 120
Last edited:
DC36Monk
Veteran Member
Very nice work!
Similar threads
