Bridge clearance for an IG32 flybridge

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

Arjan

Member
Joined
Apr 12, 2021
Messages
9
Vessel Name
Ballena Blanca
Vessel Make
DeFever 44 OC
I am looking at buying one of these and would like to know if it fits in my covered Bertha or of I would need to raise the top, does anyone know the height without the Bimini?
 
Various boat dimensions were set out, for multiple models, in the Owners Manual for IGs. The Seller may be able to access the Manual for you.
 
The only sure way is to measure it. Built boats can vary quite a bit from design specs.
 
Hey Arjan, mine is 5.5 metres, but as you have already been informed by those in the know, none are the same.
 
(For what it's worth) the 1996 Edition of Motor Yachts & Trawlers gives the IG 32 clearance as 12' 4".
 
I measured about 15' to the top of the Bimini on mine, but it also depends if you have a mast (mine was removed a long time ago).
 
We have a '95 IG36 with a mast and our air draft is 20' - about 3' above our bimini so if yours has a mast, dont forget that it will be higher than your bimini too. Have seen several "oopsy"s over the years and its never pretty!!
 

Latest posts

Back
Top Bottom