Search results

Prop speed will reduce the wear on the anodes, but not eliminate the need for them.

I know someone who used a similar product, a clear bottom paint, on their center console. Works great when the boat is being used on a regular basis. They had a delay getting the boat up on a lift for the month before they were taking it over to the Bahamas, and one month of sitting at the dock...

I would rule out a problem between the pedestal and your boat first. Turn off the power at the boat and pedestal. Disconnect your shore power cord from the pedestal. With the cord plugged into the boat, measure resistance with your ohm meter between the ground plug on the cord (end that plugs...

That fault might be that there is not a good ground on the shore power connection. I believe if your galvanic isolator is bad the bottom light would be red. Ground Wire RED: Indicates that the ground wire (green wire) is not connected to the shore properly. The fault can be caused by the green...

If you want to update to the current ABYC recommendations then replace with an ELCI breaker instead of fuses. Like a GFCI, it will interrupt the circuit if there is an imbalance in the hot & neutral lines which indicate current flowing through the grounding wire...

I think that's a typo, you meant magnesium only in fresh water.