Search results

starlink What kind of upload speed are you getting with a 250mp download??? Have one on order but work really hinges on upload. Cheers Bryan

We're between boats and so have signed up to be "Bumper Boat" drivers :) Chartered on for a week in August...will share our experience with the forum when done. They are single engine that drives a hydraulic prop, bow thruster, stern thruster and generator. Looks like the Admiral will not...

Dave, I used two Eva-dry Edv-1100 Electric Petite Dehumidifiers in my Mainship 34T for summer storage in FL. One in each of the sinks with a hole drilled in the tank and I had zero mildew anywhere in the boat. I would think one of these would work in the space you have. As we had shore power...

Hmmm....all the functions of the old advance search are included under "Filters"...even if you pick a state...if you click on it again you get specific cities within the state. Took a little getting use to but I still am able to search as I did before...no clue why they changed it.

A&J Boatworks...speak time Steve

look at the Dingy Caddy...i have it on my 34T and it tilts/pulls the dinghy half up on the swim platform...when we need the platform access (for the dogs) we just lower it part way and the platform is clear

Don, Looks great! Many thanks for posting all your projects and upgrades...its been a great resource for all us other 34T folks. I only wish I had seen this before we replaced the carpeting last year! Yours looks much better. Cheers Bryan

We have an '08 34T and both of us fit in the berth...I'm 6'3". We did get a custom mattress for it from one of the vendors at a past Trawler Fest...they even had the mattress hinge so you could easily open the storage area under the foot of the berth. We did end up getting fitted sheets for it...

Recently looked at several Offshore’s...very impressive and worth a look.

Dave...I have an '08 34T single engine and been doing the snowbird thing each year from CT to FL. Been caught in some big seas unintentionally (Jersey Coast, Martha's Vineyard, Gulf Steam back from Bahamas)...here's what we've learned to address this issue: - I have the Garmin AP ('10...

Depending on wave conditions I use to lose the prime on my AC pump a lot when turning on after traveling....Added one to my AC system between the through hull and strainer....never lose prime any more.

You can make Active Captain reviews and comments directly from Aqua map...if you have your Aqua map updating with active captain data...for a marina review just click on the “star” in the header...i find it easier then clicking on the “pencil” you can still leave comments

We went with Giant aluminum commuter bikes $300 or so....full size 7 gears ....can really cover a lot of ground. Starting year 3 and still working. Regarding corrosion I have become a bio shield believer....first day with bikes sprayed every inch of my bike....moved it down the dock to get the...

I went through last Sunday ....decent swell from southeast but had an in coming tide so all went well. Channel/inlet is well marked and I favored the red side as the breakers right next to the green we’re a little close for my taste.

First thing I added when we bought the boat 3 years ago was Tony's 2 stage filter system with vacuum gauges...boat had been onto hard for three years and did not want to take any chances with fuel gunk or hiring a polishing service. 1,300 hours later I'm very happy I did ...vacuum gauges allow...

This was the first time we stored the boat for the summer, in Chesapeake, VA. Set up two Everdry 1100's ...drilled a hole in the water container and put one in the galley sink and one in the head sink. Came back to the boat two weeks ago (3 1/2 months)...and not a spot of mildew. Could not...

A one day old Giant aluminum commuter bike. After spending 30 minutes spraying every inch with T-9....moved to end of finger to do the admirals bike....heard a splash and was able race down and grab one of the handle bar ends just as it went under....net is two years later bike is in great...

I think 10 gallons works...I have a Y-valve with a 3 foot length of rigid hose...I fill two 5 gallon buckets...put the hose in one and as it is drawn down I pour the other bucket in and go turn the motor off. At the last service the tech said the inside of the cooler looked new. I like the...

Tom.B If you're still in Northwest Creek you're in good hands...I was there for Mathew and while each storm is different I was very impressed with the work the staff did to keep all safe. Key was running long lines for each boat across the fairway to pilings on the other side to keep boats in...

Chris Parker this morning increased his probability of this reaching the East Coast from 20% to 40%...definitely in the “keep your eyes on” catagory

I have a 2009 Mainship 34T single yanmar and it has a 4 blade....no cavitation issues. Oak's advice to check all things out first is the way I'd go. When we checked our prop at first haul out after purchase we found each blade has its own angle and some "pinkish" corrosion/etc. Had it tuned...

For the single mid-ship tie to work we used 18" x 29" taylor made inflatable fenders...much bigger than the normal docking fenders...when through with the locks we just deflated and stored. Cheers Bryan

I have an '09 34T and the wiper arms and blades were AFI (replaced all of them this past spring)...don't know if the 400 is the same. Cheers Bryan

We went through this summer using a mid-ship/cleat line next to the helm door and two very large inflatable fenders set forward and aft. All the locks had a pipe or wire inset in the wall and I would just loop the mid-ship line around the pole/wire. With gloves and a short boat pole, make sure...

howard, I would get Steve from A&J Boatworks to take a look...we have had our boat in their twice and very happy with glasswork, etc. A&J Boatworks Cheers Bryan