Search results

Hi, On my IG32, the knob above the stove is the shut-off valve for the propane tank. You can see the valve under the upper helm station, on the port side. I replaced this manual valve with an electric solenoid with the control panel in the galley. The knob next to the sliding door below the...

Hello Everyone, Thanks to all for the many good suggestions. I measured the deadrise angle in the bilge today. It is between 11 and 12 degrees. It was not possible to get an exact measurement because the interior surface of the fiberglass is a bit uneven, giving different readings in slightly...

BruceK, Measuring the inside angle is a great idea! It might not be exact, but I could certainly get an idea. Thanks for the suggestion. Harry

Thanks for the prompt replies. I have a traditional IG 32. There is now a transponder for an old depth sounder on the boat. It is about 1/3 of the way from the stern to the bow. It is also about 1/3 the distance from the keel to the side of the hull. We will be placing the new one in that...

Hello everyone. I am new to the forum, having recently purchased a 1987 Island Gypsy 32. Does anyone know the deadrise angle on the Island Gypsy 32? I am installing a transducer for a Furuno depth-sounder, and there are different models for deadrise angles of less that 15 degrees and over 15...