Search results

I will look through my notes and email. Hopefully I can find his name and cell number that we communicated on.

The next day we wrote an email to corporate and explained in detail on how tech support took their time walking through the process of calibrating the system. I specifically mentioned the tech’s name. I also informed them that they are lucky to have an employee on their team like him.

I’m sorry, unfortunately I do not have his direct contact information. But call the manufacturer and ask for tech support.

I can see why it’s possible for the condensate lines to periodically get clogged. Thank you

Thank you very much !!!

Hello, We own a 2009 34t Mainship. I have a question regarding the condensate drain hose for both air conditioners. Both condensate drain hoses empty into the bilge area. The sitting water is creating a black mildew area, even after the bilge pump empties most of the water. My question is...

We recently listed our boat on “Boat Trader” back in April for a total cost of $339.13 dollars. The listing is by private owner not listed with a broker. We noticed that our boat model was listed on the second page, which is understandable at first. But now we are noticing that when there is a...

Yes, we own a late model 34T with a substantial prop tunnel. What does (CW) mean? Thank you

Great advice… thank you! Looking forward to practicing.

Interesting. Looking forward to practicing. We have a thruster too, hopefully we can nail this.

Interesting that your MS350 walks to stbd. Maybe she has a counter clockwise prop? Are you turning the rudder hard to port? When the wind is blowing, we open the isinglass up on the Flybridge to cut down on being pushed when docking. We need to start practicing. Thanks for the advice.

She is a 2009. Thanks for that information. We will give it a try. You mentioned that the rudder should be straight. I was under the impression that the rudder needed to be hard starboard in order to turn port when in reverse. Looking forward to practicing in calm winds.

Good morning, We own a 34 Mainship Flybridge. I would like to master backing into our new slip. With a single engine, backing in can be a little tricky. For those of you with a Mainship/single screw, when backing in does your boat have a tendency to move towards the portside? Trying to...

I just wanted to let everyone know that the pump started leaking again :( Dometic asked that we needed to send them a video of the leak. Not fun trying to videotape with a mirror in order to see where the leak was coming from. Anyway, Dometic have been responding right away. Here was their...

The pump is working good again. We opened all the faucets including the shower head too. I guess that there was air in the system.

Hello, We just installed a new jabsco HD5 fresh water pump. Unfortunately the pump lacks pressure. We can hear air spewing out and then pressure starts to become a little stronger.. We are not at the boat now but maybe we need to open all the faucets including the upper sink, shower and run...

Thank you for your valuable feedback. I’ll be looking into this extensively. Will let you know how I made out.

I received a reply from Majilite regarding the cleaning instructions. I will upload the two (2) PDF’s. Thank you for your email and we hope you are well. I have attached our cleaning instructions and user guide for your review. Please let me know if you have any further questions. Thank you...

I will look into your suggestion. I asked Raymarine support about possibly using another camera with a BNC connection. I will check to see if the BNC connector from my chart plotter has multiple pins. Here is Raymarines response: “The CAM100/CAM50 will be the only compatible cameras with the...

Rob with Wisper Walls reached back to me with the following information: Good to know that there are companies still out there that respond and care… Hi Linda, Thank you for your inquiry through our website (below.) It’s good to read our panels have worked well on your ceilings and upper...

I reached out to the manufacturer Whisper Walls… I’ll let you know what they say. Thanks,

We own a Raymarine C90W chart plotter. Was hoping to add a camera to the C90W. But unfortunately we cannot locate the recommended Raymarine CAM100 camera. They are no longer being produced and they are out of stock on online stores. I reached out to Raymarine support hoping that they could...

Would you happen to know the name/manufacturer of the fabric that is on the walls and ceilings?

Thanks

Thank you for your reply. I will use your advice for the walls and flooring. We will also be sanding down one of the moldings that surrounds the countertop near the gallery sink. Hopefully I can match the color with the correct stain. Thankfully the carpet in the state room area is in great...