Search results

I am curious to know how things worked out for the OP. any update on how the problem with the leaking fuel tank was resolved. From reading posts on another forum from some one in england with a similar leak in the starboard tank, the tanks were removed and replaced. Access was gained by...

So I ended up finding a used 2 year old Neptune lift rated at 30000 lbs. then had to have 8 pilings driven. The rest of the installation I was able to do with some help from a friend to rig a device to lift the motor assemblies up on those pilings. Electrical work was fairly simple as I was able...

never mind, after pulling washer in and out several times, i finally found the drainage for the washer. The stopcock is located in the floor of the port closet of the main cabin . problem solved

So my new 2016 44 swift trawler came with the washer dryer option and I have been testing it out. The machine runs and fills with water, but won't drain even though i hear the pump running. I suspect a kink in the hose, or a closed valve in the drain line. But here's the problem, I can't find...

Update . The rear thruster is working now with new TCX box from Quick usa. lots of corrosion on the wires and connectors leading to the thruster . In fact the connector providing power was completely corroded. Its a little crazy that the connectors to the pigtails from the TCX box have...

thanks to every one for your input. very useful stuff. On the circut board. A new one on the way for 445$ from Quick USA. I will do some things to waterproof it, like seal the areas where wires enter with RTV, maybe tape the areas where lid is screwed on, and them I am going to mount it a...

i am very happy with my new to me 2016 44 swift trawler. I am working on an issue where the raymarine autopilot throws in full port rudder as soon as placed on auto. I have upgraded the software, and done the recalibration of rudder. next I would like some help on where the fluxgate compass is...

thanks for the thoughts and ideas. I have some problems with boat wakes and north winds creating chop at my location, which is why I am considering a lift. One of the considerations if I do this is to identify the center of gravity of the boat, to properly locate the lift. Engines are aft...

i am about to purchase a 44 swift trawler and am considering putting the boat on a boat lift. I am wondering if anyone else has done this and how it worked out. what size lift? make model of lift?