Search results

On my 2018 44 Swift I have and auxiliary breaker switch on the panel that allows me to by pass the inverter. When switched on it provides power to all my outlets on the boat without the inverter.

Glad to hear. Suncoast is a good company. I have used them for service for years.

Dave Check with Alex or Robby at Viage they had a similar issue on another swift that I believe was resolved by replacing the wire harness.

Follow up. Thankfully Volvo replaced both transmission coolers under warranty.

I tried logging on numerous times. I called the spare parts phone number and the rep informed me of the new procedure to obtain needed parts.

Benetaue spare parts recently changed their policy. You now need to register through an authorized dealer to get access to the spare parts site. And then place your order through the dealer. You can no longer log on with your user name and password. You are now required to register with your...

Sorry to see this. I am sure you can replace the boom thru Bennetaue spare parts. However you have to go through your Bennetaue dealer.

Thanks That is exactly what I used to seal the hose to the brass nipple.

I removed the hose and used a wire brush to clean away what appears to be salt deposits on the port side there is some pitting and erosion of the the cooler body. The starboard side had very little salt deposit .I am wondering if the cooler replacement will be covered under my extended warranty...

Hi all I recently started to notice some corrosion /electrolysis on the out flow hose connection on my port transmission cooler. Anyone else seeing this issue.Thanks

Hi yes bottom is clean

Hi my goal is to reduce engine load. With the boat heavy. full fuel ,water etc. Currently my top rpm with full load is just at 3500 RPM. By tuning the props I am hoping to be around 3560-3580 with a full load thus reducing the engine load.

I purchased a pair of new props from the previous owner of my boat. The props are currently in the propeller shop being evaluated and tuned to provide me with better performance. The initial scan revealed the propeller camber was an inch larger on the portside prop. The shop will adjust the...

I just read a post on another site which indicated the zincs were eliminated in 2016 model year.

Very nice install. Looks Great

I will take some pics today.

What year are your motors. I have read that the newer motors have the heat exchanger cores that are made out of a different alloy that are corrosion resistant thus no need for zincs. My 2018 does not have zincs

My 2018 has no zincs on the motors

I just delivered my props to the shop I will share results when I get them back.

Mystery Thank you for taking the time to help me out .These scans are very much appreciated.

Mystery .Thanks my main goal is to reduce engine load and add longevity and less wear on the motors. I purchased a brand new set of props from the previous owner. Before I install them on the boat I was hoping to see what other owners have installed on their boats with real world rpm numbers...

Hi All I have owned my boat for about 6 months and now I would like to dial in my boats performance by adjusting my prop specs. I am reaching 3490 -3500 on my port motor and 3530 on my starboard motor. Full fuel and full water plus all the stuff my wife has loaded the boat with. LOL. With a...

The fluxgate compass on my 2018 44ST is located under the helm station. Access is behind the mirror in the guest head. There is a screw at the bottom of the mirror that needs to be removed to open the mirror door. With regards to your stern thruster that area should not have water in it mine is...

Sold

For sale 2021 Yamaha four stroke 9.9 15 inch less than 2 hrs. run time. Warranty thru 1/24 brand new condition. Located Punta Gorda fl. $2250