JD
Guru
My 2006 34t has several switches on the 12V lighting that I would like to use a dimmer control. That being said here are a few obstacles to overcome. One is that the light switches are Vimar 250V 3.5cm long x 2.1 cm wide x 2.6 cm deep rocker style. On the Vimar site they have a dimmer that size but it is for 120V or 240 V @ $45 each. So the question is does it have to be a 12V dimmer or will these work for the tune of $200?
Yes the other way is to put 12V dimmers in line with each switch but that means four or five of them and that will clutter up the place. These are mounted very neatly on the side cherry wood bulkhead. I could insert the 12V dimmers above the uppers and below the lowers but I really would rather not.
Thanks.
Yes the other way is to put 12V dimmers in line with each switch but that means four or five of them and that will clutter up the place. These are mounted very neatly on the side cherry wood bulkhead. I could insert the 12V dimmers above the uppers and below the lowers but I really would rather not.
Thanks.