Albin 40 vs 43

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

seattleboatguy

Senior Member
Joined
Nov 2, 2013
Messages
327
Location
USA
Vessel Name
Slow Bells
Vessel Make
Marine Trader 38
I've been looking at some 40' and 43' 1980s vintage Albins on YachtWorld. I was expecting the galley area to get squeezed for the 40 footer, but the galleys look about the same. Was the lion's share of the "squeezing" done in the main cabin area?
 
40ft here too...just from the layout sketches looks like every space is just a tad bigger...I didn't notice anymore lockers or new spaces to make up the 3 feet.

If I had found a 43 with a single...I may have tried to make up the diff in cash if I had to...there are some features that I like over the 40 and the extra room may have allowed me to more easily fit a washer/dryer...but that I'm not sure of.

But if I had a 43, I think a dozen little things with storage of stuff on the 40 may have not surfaced...but maybe so as I never had a comparative look.

The 3 feet would have meant higher operating expenses, haul, dock, etc...but not enough to make me think smaller.
 
If I may, I'd like to throw in a question that is along the lines what Seattle asked.

In the fresh water (Lake) boating that I have experience with, it is often said that nobody was ever sorry they bought the bigger motor.

So I'm curious...

Has anyone ever been sorry they bought the bigger boat?
 
If I may, I'd like to throw in a question that is along the lines what Seattle asked.

In the fresh water (Lake) boating that I have experience with, it is often said that nobody was ever sorry they bought the bigger motor.

So I'm curious...

Has anyone ever been sorry they bought the bigger boat?

I would say about 90+% of all boatowners buy too big...

I always say I'd be a bad broker because I'd always be telling people to buy smaller and put the excess cash to great gear and operations.

Most never use a boat as much as they thought...

The only people that buy too small is well off retirees and liveaboards or the 1% really serious cruisers...some of them may say I could do with less...but I'll bet that small percentage of boaters usually thinks they could always use a few more feet.
 
The Albin's have really sweet lines and given their heritage look to be a very sea kindly boat.
Live aboards around here refer to the '3 foot syndrome' 'I wish we had 3 foot more' !
 
Mention was made above of a preference for a single screw configuration in an Albin 43. I owned a twin Albin 43 for many years and loved it. To my knowledge there were maybe ten or so built with a single engine. A good friend of mine has one of those and is very well pleased with it.
 
Albin 43 Sundeck

I have never been on a 40 Albin however our 43 sundeck has one of the largest full beam staterooms in a boat of this class. We looked at many trawlers and the salon and stateroom sold us on this boat. It is not perfect but checked a lot of the boxes. The stateroom is full beam at 14'6" and has ample storage with a good size master head. That coupled with the exact size sundeck above the master room stateroom provides exceptional living area for those of us in the deep south. Sorry I had to throw that in. LOL
 
ft vs inches

The Albin's have really sweet lines and given their heritage look to be a very sea kindly boat.
Live aboards around here refer to the '3 foot syndrome' 'I wish we had 3 foot more' !
I wish I had 3 more inches.:D
 
We had an '86/'87 Albin 43 Sundeck trawler for many years before it was destroyed by Hurricane Michael. She was admittedly overpowered, having twin Cummins 6BT5.9M 210 HP engines. On several occasions, that power was appreciated very much. If I ever get another large boat it will have the same Cummins engines - not after-cooled, not computerized, just with turbos. (No experience with aftercoolers on Cummins engines, just that our engine mechanic said they could be troublesome.) That vintage of engines were not computer controlled. I did almost of the maintenance on the engines after my mechanic showed me how simple the Cummins engines were to work on for simple things like setting the valve lash clearance. I acquired the maintenance manuals for the engines and transmissions so I could properly service them. I liked the twin configuration for maneuvering purposes. We always tried to avoid bad weather, but were once caught in 8+' seas off Cape Romano, Florida, that, fortunately, were directly on the bow. The Albin 43's have a huge flared bow. Heading into the waves, the boat would start to ride up on the wave front, then cut into the wave. Water would go flying 20-30' out on each side of the boat with a loud swoosh. The windshield hardly got wet. We were not going very fast, and the boat handled the waves beautifully. Actually, I was surprised at how little the boat pitched in those conditions. I had often wondered about how well the boat could take large waves and was very pleasantly surprised. The engines' power came in handy, especially in large following seas. At that time, the boat had a Raymarine autopilot that struggled to handle following seas (recommended hydraulic pump was too small), but could, up to a point. I quickly appreciated having an autopilot steer the boat in good weather and keep it on course until I twisted the remote's knob for a slight, or major, course change. I have been in several other makes of boats of similar size. The Albin 43 was one of the best sea keeping boats I have been on of that size as it was heavily built. Florida is noted for its quickly developing thunder storms and I did not like sitting at the upper helm in bad weather so I installed all the needed equipment, duplicating the upper helm's, at the lower helm - originally the lower helm had only had the wheel, a compass and engine instruments. Later, a lightning strike directly on a VHF antenna wiped out all of the installed electronics and a new Garmin suite was installed - wow - fantastic - what an improvement! The original electronics were a hodge-podge of electronics that I installed as I could afford them. The Garmin suite was a totally integrated system.
… and then, Hurricane Michael came along and took the boat and three of its 5 50' pilings that were 25' in the sand bottom, down about a third of a mile and ploughed into some other pilings - sinking her. One the mooring pilings that were pulled out at our dock snapped back and went up inside the hull and had just a few feet sticking out the back. I don't know if it punctured the hull in the bow or not, but I think it did. The hole would have been below the waterline. The breast lines on one of remaining pilings were doubled 3/4" nylon and the other piling had tripled 3/4" lines on it. The doubled breast lines broke, but the tripled forward starboard bow lines just pulled the piling over to almost 45 degrees, then slipped off. For anyone who does not know - Hurricane Michael was supposed to arrive as a Cat 3 storm, but arrived as a Cat 5 storm. I hope to never see another one. The damage around here is still totally unimaginable, even though it has been many months since the storm.
 

Latest posts

Back
Top Bottom