Californian name plate
- Thread starter Ray.Yager
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
DBoat
Veteran Member
- Joined
- Oct 20, 2020
- Messages
- 74
- Location
- United States
- Vessel Name
- Layla
- Vessel Make
- 1979 34' Californian LRC
HA! I was just looking for this too! Hopefully someone knows where to get one? I suspect, though, we will have to get something custom made...
-D
-D
Comodave
Moderator Emeritus
- Joined
- Jul 2, 2015
- Messages
- 22,435
- Location
- Au Gres, MI
- Vessel Name
- Black Dog
- Vessel Make
- Formula 41PC
I would find someone that has the machine needed to cut S/S and have them made. If you ask on the site and see how many people would like some it may bring the cost down from the stratosphere to just really expensive.
DBoat
Veteran Member
- Joined
- Oct 20, 2020
- Messages
- 74
- Location
- United States
- Vessel Name
- Layla
- Vessel Make
- 1979 34' Californian LRC
I might look at 3D printing something. I'll let you know.
-D
-D
- Joined
- Apr 15, 2008
- Messages
- 13,738
- Location
- California Delta
- Vessel Name
- FlyWright
- Vessel Make
- 1977 Marshall Californian 34 LRC
Years ago I asked the Navigator Yachts factory foreman if there were any metal Californian nameplates remaining. He advised me they were often requested but not available any longer. He suggested looking at making a peel-n-stick version.
That was before the Navigator facility was sold and closed.
That was before the Navigator facility was sold and closed.
OP
OP
Ray.Yager
Veteran Member
- Joined
- Dec 28, 2019
- Messages
- 27
- Location
- US
- Vessel Name
- MV RADIANT
- Vessel Make
- 1991 Carver Californian MY 4809
Californian Logo
Well, yesterday I pulled off the backing plate and to my surprise, it’s not plastic. It’s actually aluminum and the logo is cast aluminum. Rather than replace it, I’m going to sand and re-paint the plate. I have already sanded the face of the letters back to a smooth finish. They standup to sanding very nicely. Looks gorgeous.
Well, yesterday I pulled off the backing plate and to my surprise, it’s not plastic. It’s actually aluminum and the logo is cast aluminum. Rather than replace it, I’m going to sand and re-paint the plate. I have already sanded the face of the letters back to a smooth finish. They standup to sanding very nicely. Looks gorgeous.
Alaskan Sea-Duction
Guru
- Joined
- Jul 6, 2012
- Messages
- 8,084
- Location
- USA
- Vessel Name
- Alaskan Sea-Duction
- Vessel Make
- 1988 M/Y Camargue YachtFisher
After all that and we don't have any pictures??? Come on now post a picture of the finished product!!
Last edited:
DBoat
Veteran Member
- Joined
- Oct 20, 2020
- Messages
- 74
- Location
- United States
- Vessel Name
- Layla
- Vessel Make
- 1979 34' Californian LRC
Ray,
I don't have any Californian nameplate on my boat, so I need to recreate it from scratch. Could you give me the basic dimensions of yours while you have it off and working on it? Dimensions of the base LxWxH and a few different dimensions of the lettering: LxWxH of the Capital "C" and the small "o". And the length of the whole "Californian". I am making a high resolution image of the Californian logo made from a high quality scan of my User Manual. Prefer it in metric, but Inches is fine too. I am going to model this up in Fusion 360.
I don't have any Californian nameplate on my boat, so I need to recreate it from scratch. Could you give me the basic dimensions of yours while you have it off and working on it? Dimensions of the base LxWxH and a few different dimensions of the lettering: LxWxH of the Capital "C" and the small "o". And the length of the whole "Californian". I am making a high resolution image of the Californian logo made from a high quality scan of my User Manual. Prefer it in metric, but Inches is fine too. I am going to model this up in Fusion 360.
- Joined
- Apr 15, 2008
- Messages
- 13,738
- Location
- California Delta
- Vessel Name
- FlyWright
- Vessel Make
- 1977 Marshall Californian 34 LRC
The C is 2 inches high by 3 inches wide
The o is 5/8 inch high and 1 inch wide
The LOA is 13 1/4 inches.
The o is 5/8 inch high and 1 inch wide
The LOA is 13 1/4 inches.
Last edited:
DBoat
Veteran Member
- Joined
- Oct 20, 2020
- Messages
- 74
- Location
- United States
- Vessel Name
- Layla
- Vessel Make
- 1979 34' Californian LRC
Thanks FlyWright! That helps a lot! Still working on it. Hopefully pics soon.
-D
-D
- Joined
- Apr 15, 2008
- Messages
- 13,738
- Location
- California Delta
- Vessel Name
- FlyWright
- Vessel Make
- 1977 Marshall Californian 34 LRC
Here's a link to an earlier thread on this topic...
https://www.trawlerforum.com/forums/s24/looking-californian-nameplate-s-37326.html
This link goes to the post with my logos from a few years ago.
https://www.trawlerforum.com/forums/showpost.php?p=644888&postcount=16
Being 1977 originals, mine definitely need some cleanup!
I'll combine the two threads on this same topic to make it easier to find the info.
Last edited:
TG
Senior Member
This company makes custom badges for guitar amps. The site says they can do custom artwork and custom sizes in stainless.
https://www.droplightind.com/products/p/badges
https://www.droplightind.com/products/p/badges
DBoat
Veteran Member
- Joined
- Oct 20, 2020
- Messages
- 74
- Location
- United States
- Vessel Name
- Layla
- Vessel Make
- 1979 34' Californian LRC
Here is what I have modeled up in Fusion 360 so far. It took me a while to get all the curves corrected from my imported picture.
TG, That company looks promising for a Stainless Steel nameplate..
-D
TG, That company looks promising for a Stainless Steel nameplate..
-D
boomsurf
Member
- Joined
- Jan 18, 2021
- Messages
- 15
- Vessel Name
- Novela
- Vessel Make
- Californian 42 LRC
I am very interested in obtaining a pair of these if available. Perhaps a group buy could be arranged.
DBoat
Veteran Member
- Joined
- Oct 20, 2020
- Messages
- 74
- Location
- United States
- Vessel Name
- Layla
- Vessel Make
- 1979 34' Californian LRC
I finally made a first 3D Print. Not perfect yet, but still pretty good.
-D
-D
- Joined
- Apr 15, 2008
- Messages
- 13,738
- Location
- California Delta
- Vessel Name
- FlyWright
- Vessel Make
- 1977 Marshall Californian 34 LRC
Very nice, David!
Alaska Californian 37
Veteran Member
I finally made a first 3D Print. Not perfect yet, but still pretty good.
-D
That looks really good!
boomsurf
Member
- Joined
- Jan 18, 2021
- Messages
- 15
- Vessel Name
- Novela
- Vessel Make
- Californian 42 LRC
Looks great. Would love to be able to get one.
- Joined
- Apr 15, 2008
- Messages
- 13,738
- Location
- California Delta
- Vessel Name
- FlyWright
- Vessel Make
- 1977 Marshall Californian 34 LRC
Outstanding! What are the dimensions and material?
boomsurf
Member
- Joined
- Jan 18, 2021
- Messages
- 15
- Vessel Name
- Novela
- Vessel Make
- Californian 42 LRC
Please keep us posted on how to obtain a pair of these. Or if you could just provide the graphics file that would also work.I finally made a first 3D Print. Not perfect yet, but still pretty good.
-D
Tranquillity III
Member
2 Californian nameplates
I've got 2 OEM vinyl nameplates for sale. They have never been used, still have the original release paper on the backside adhesive tape.
Measure approx. 14" by 3.5" by 3/16" thick.
I've got 2 OEM vinyl nameplates for sale. They have never been used, still have the original release paper on the backside adhesive tape.
Measure approx. 14" by 3.5" by 3/16" thick.
NurseLinda
Member
- Joined
- Jun 27, 2022
- Messages
- 12
- Vessel Make
- 1981 Californian 34' LRC
Any idea how much you may want for the 2 OEM vinyl nameplates?
Tranquillity III
Member
Sorry Linda, sold them last week.
NurseLinda
Member
- Joined
- Jun 27, 2022
- Messages
- 12
- Vessel Make
- 1981 Californian 34' LRC
I finally made a first 3D Print. Not perfect yet, but still pretty good.
If you have the STL file for a 3-D printer for the Californian logo?
