HeartWarrior
Member
- Joined
- Sep 8, 2019
- Messages
- 23
- Location
- United States
- Vessel Name
- Heart Warrior
- Vessel Make
- 1988 Island Gypsy 40
I'm in the process of replacing the fresh water lines between my forward and aft tanks and found that there is no check valves between the two tanks. I ask this question since it appears that when I fill up either of the tanks the water will flow to the other tank and appear to fill both tanks at the same time. I would like to keep the filling process separate and was going to install check valves on the output side of each tank so this does not happen.
Just looking to see if anyone has done this and found it to be problematic for any reason. I cant find any reason why it would.
Thanks for the help.
Just looking to see if anyone has done this and found it to be problematic for any reason. I cant find any reason why it would.
Thanks for the help.