MurrayM
Guru
Never heard of this one before; a 26' loa, 9.5' beam Sundowner Tug:
1999 Sundowner Custom Power Boat For Sale - www.yachtworld.com
1999 Sundowner Custom Power Boat For Sale - www.yachtworld.com
Custom 26' Sundowner Tug
- Thread starter MurrayM
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
O C Diver
Guru
- Joined
- Dec 16, 2010
- Messages
- 13,317
- Location
- Fort Myers, Florida
- Vessel Name
- End Of The Line
- Vessel Make
- Trinka 10 Dinghy
OP
OP
MurrayM
Guru
Gosh, really?
There might be a larger story here, like maybe they were planning on putting these into production just before going belly up...
janice142
Guru
- Joined
- Oct 12, 2011
- Messages
- 1,252
- Location
- USofA
- Vessel Name
- Seaweed
- Vessel Make
- Schucker mini-trawler
I've been aboard a larger Sundowner. What I recall most is that there was very little bilge between sole and hull. Six inches of water would have put water into the aft cabin.
Aft was galley/dinette.
Laid out nicely and finish was okay. Not Island Packet level, but nonetheless good. Lots of wood on the interior. We ate inside in the aft cabin. Galley was a level above the dinette (just a step)
It's been a few years... It looked like it had possibilities for a couple.
Aft deck was small but accommodated a barbecue on the rail.
Similar to a Nordic Tug though lots less $$. Priced about where you see that one back in 2007ish, give or take. Nordic Tugs then were $125 and Outer Reefs ran $35ish.
Prairie Trawler's at 29' ranged from $15 (eek condition) to $65 (wow!) with most in the $25-$35 range. Same time frame as above.
I found Seaweed in 2008. Was shopping/being ignored by brokers in 2007.
Way to get a broker to respond:
Sign letters Janice (and Frank)
Meet Frank:
Aft was galley/dinette.
Laid out nicely and finish was okay. Not Island Packet level, but nonetheless good. Lots of wood on the interior. We ate inside in the aft cabin. Galley was a level above the dinette (just a step)
It's been a few years... It looked like it had possibilities for a couple.
Aft deck was small but accommodated a barbecue on the rail.
Similar to a Nordic Tug though lots less $$. Priced about where you see that one back in 2007ish, give or take. Nordic Tugs then were $125 and Outer Reefs ran $35ish.
Prairie Trawler's at 29' ranged from $15 (eek condition) to $65 (wow!) with most in the $25-$35 range. Same time frame as above.
I found Seaweed in 2008. Was shopping/being ignored by brokers in 2007.
Way to get a broker to respond:
Sign letters Janice (and Frank)
Meet Frank:
Donsan
Guru
- Joined
- Jul 6, 2014
- Messages
- 2,300
- Location
- United States
- Vessel Name
- No Mo Trawla
- Vessel Make
- Hurricane SS188
k)
Meet Frank:
I like Franks! In fact, I have a collection of Franks most thanks to the work of Merritt Island Potters...now deceased.
78puget-trawler
Guru
I almost went for a very nice 30 Sundowner for bigger bucks, nearly double what I ended up paying for the Puget Trawler. Nice boat but like all similar "tugs", no aft cabin, which is something I really wanted in a boat, so guests if ever aboard have actual sleeping quarters and not just a settee bed, in the middle of everything.
Last edited:
OP
OP
MurrayM
Guru
Hi Al,
I thought ours was the smallest Sundowner Tug at 30' and 11.5' in the beam. This one is 26' and 9.5' in the beam.
Making a mold for just one boat seems improbable, which makes me think they had plans to make more...part of the Sundowner Tug story I'd never heard even a whisper about before.
I thought ours was the smallest Sundowner Tug at 30' and 11.5' in the beam. This one is 26' and 9.5' in the beam.
Making a mold for just one boat seems improbable, which makes me think they had plans to make more...part of the Sundowner Tug story I'd never heard even a whisper about before.
Padeen
Senior Member
- Joined
- Mar 26, 2015
- Messages
- 110
- Location
- United States
- Vessel Name
- Mary A
- Vessel Make
- Chris-Craft Speedster
Seems like some kind of error with the listing: the YW "Description" tab goes on about a 30' boat in conflict with the "Full Specs" tab, which refs 26'.
Nice boat regardless!
Nice boat regardless!
Al
Guru
- Joined
- Apr 1, 2012
- Messages
- 2,206
- Location
- usa
- Vessel Name
- 'SLO'~BELLE
- Vessel Make
- 1978 Marben-27' Flybridge Trawler(extended to 30 feet) Pilothouse Pocket Cruiser[
Hi Murray, Maybe this; 30' boat in conflict with the "Full Specs" tab, which refs 26'. confused me. Your giving the specs has me agreeing more with you. Sure looks the part hull wise.
Always enjoy reading on the Sundowners.
Al.
PS: have you ever had the sensation for additional ballast other than full tanks?
Always enjoy reading on the Sundowners.
Al.
PS: have you ever had the sensation for additional ballast other than full tanks?
OP
OP
MurrayM
Guru
Hi Al,
I know that's what you did with your boat, but think I'll go with paravanes once we start winter cruising.
The PO of our boat replaced the original 60hp (65hp?) with a 100hp engine and added an extra 40 gallon fuel tank in the lazarette aft of the original 50 gallon tanks. With the couple hundred pounds of ballast I chucked into the bow to try and lift Badger's arse a bit, that's quite a bit extra weight down low than it had originally.
Hope you're enjoying the fine fall sunny weather today
ouisconsin
Newbie
Hi Folks, I'm interested in a 30' Sundowner Trawler listed in Maine. Looking for feedback on how you like yours? Any help would be appreciated. Thanks in advance. Kevin
OP
OP
MurrayM
Guru
So much depends on the previous owners.
They suffer the ills of 1980's Taiwan manufacturers (teak screwed through perfectly good & waterproof fiberglass decks for one) but for us that's acceptable. We know some elbow grease will be needed if we want to keep Badger for a few more decades (new fuel tanks, spongy spot on the aft deck, etc) but in the meantime we have a boat perfectly suited to our needs which was affordable and allows us to cruise in confidence...with an eye on the weather.
They suffer the ills of 1980's Taiwan manufacturers (teak screwed through perfectly good & waterproof fiberglass decks for one) but for us that's acceptable. We know some elbow grease will be needed if we want to keep Badger for a few more decades (new fuel tanks, spongy spot on the aft deck, etc) but in the meantime we have a boat perfectly suited to our needs which was affordable and allows us to cruise in confidence...with an eye on the weather.
