Pascall
Senior Member
- Joined
- Oct 15, 2022
- Messages
- 330
- Vessel Name
- Passi
- Vessel Make
- Hand made Barkas
I will introduce myself.
I am MS PASSI.
The first steps were taken in 1993, we bought the drawings and the permit one build a ship.
We had the shapes lasered out of the steel, then we had a kit.
The first year we welded the kit together, and we painted it with many layers of paint.
We bought a Teak tree, shaking the monkeys out, and sawed it into pieces.
All the interior including the teak decks come from the same tree.
We built everything ourselves, searchlight, bollards, handles of the doors, ventilation grilles, filters, steps, and much more.
All the stainless steel comes from the demolition waste, 1500 kilos in total.
Painting, plastering, lacquering there are many layers on the different objects!
Installing the motor, all the installation work, electrical, fitting, double glazing, it's all hand made.
Also engraving the glass plate in the table is ........
After three very intensive years the boat was launched on 31-5-1996, we were still very young and could handle the whole world, joking.
Now 26 years later she is still in new condition, her heart has now been replaced, and modernized over the years.
The counter has passed 12,000 hours and we hope to double this!
Finally, her name comes from PAScal and SIgrid, called owners.
Her name is PASSI and it's a passion.
A picture says more than 1000 words;
Pascal.
I am MS PASSI.
The first steps were taken in 1993, we bought the drawings and the permit one build a ship.
We had the shapes lasered out of the steel, then we had a kit.
The first year we welded the kit together, and we painted it with many layers of paint.
We bought a Teak tree, shaking the monkeys out, and sawed it into pieces.
All the interior including the teak decks come from the same tree.
We built everything ourselves, searchlight, bollards, handles of the doors, ventilation grilles, filters, steps, and much more.
All the stainless steel comes from the demolition waste, 1500 kilos in total.
Painting, plastering, lacquering there are many layers on the different objects!
Installing the motor, all the installation work, electrical, fitting, double glazing, it's all hand made.
Also engraving the glass plate in the table is ........
After three very intensive years the boat was launched on 31-5-1996, we were still very young and could handle the whole world, joking.
Now 26 years later she is still in new condition, her heart has now been replaced, and modernized over the years.
The counter has passed 12,000 hours and we hope to double this!
Finally, her name comes from PAScal and SIgrid, called owners.
Her name is PASSI and it's a passion.
A picture says more than 1000 words;
Pascal.
? ?
