fryedaze
Guru
- Joined
- Sep 4, 2011
- Messages
- 1,747
- Location
- USA
- Vessel Name
- Fryedaze
- Vessel Make
- MC 42 (Overseas Co) Monk 42
I am looking for a source of adjustable floor supports. These are the stainless poles that run from the Salon floor support beams to the stringers. I started some maintenance on my genset and found that the PO installed the genset in front of a support post and the access panel cant be removed without removing the pole. Its the front engine end of the unit where the pumps and belts are. I had to beat the support out of the way to remove it. I would like a support with a screw jack that could easily be adjusted and removed. The current post ids one solid piece with a socket on the top and welded flange on the bottom. Size is probably 3'-4'. I have searched the net and come up empty.
Thanks, Dave
Thanks, Dave