Hi Larry does the pump just run or does it come up to pressure then run for a second and then shut off. if it just runs I would say it needs Burping Disconnect pump between accumulator and pump, turn on pump until it gushes out and if it comes up to pressure then runs and stops you have a leak. I have a Sea Tech control panel below the lower helm that allows me to shut off each outlet this should help identify where the leak is.All,
Trying to trouble shoot a fresh water pump. It's a Jabsco PARMAX 3.
It's suppose to run until it builds up pressure in the accumulator and shut off unless someone turns on a faucet. Right now it runs non stop.
That indicates to me that:
1. There is a break in a line somewhere and it's pumping water somewhere. Have checked and find none.
2. There's something wrong with the pump.
What else and any ideas on how to troubleshoot.
Thx