Rcan
Member
I have a fruno radar model 1621 I was wondering can you upgrade the screen on that without replacing everything and rewiring everything any help would be greatly appreciated thank you so much
Furuno radar
- Thread starter Rcan
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
caltexflanc
Guru
Give Furuno a call up in Camas WA. They are very helpful. They also have a very responsive forum that the participate in. 360-834-4420
https://www.furunousa.com/en/get_support
https://www.furunousa.com/en/get_support
Carolena
Guru
Not sure what you mean by upgrade the screen, but we recently had our Furuno screen repaired by Hyde Marine Instrumentation in Gloucester VA. Hyde Marine Instrumentation - Home
The owner, Chuck Hyde, was a pleasure to deal with. We thought we would need a new screen, but he was able to repair ours to like new condition and upgraded our firmware while he had the unit on his bench. The price was very reasonable, much less than even a used plotter from ebay. If he was unable to repair, he had already sourced a new screen from Japan, and had a used one in stock that he could have rebuilt for us. No connection to the company, just a very satisfied customer. BTW, while his website focuses on Furuno, he also works on some other brands. One of my friends just set him two Garmin units to troubleshoot. I'd reach out to him and let him know your model and problem, then go from there.
The owner, Chuck Hyde, was a pleasure to deal with. We thought we would need a new screen, but he was able to repair ours to like new condition and upgraded our firmware while he had the unit on his bench. The price was very reasonable, much less than even a used plotter from ebay. If he was unable to repair, he had already sourced a new screen from Japan, and had a used one in stock that he could have rebuilt for us. No connection to the company, just a very satisfied customer. BTW, while his website focuses on Furuno, he also works on some other brands. One of my friends just set him two Garmin units to troubleshoot. I'd reach out to him and let him know your model and problem, then go from there.
Carolena
Guru
BTW, forgot to add, we considered getting a newer touch screen Furuno rather than repair our unit, but it turns out the newer screens are made for digital radar and are not compatible with the older models. Our MFD is an RDP-139.
caltexflanc
Guru
Carolena's excellent post reminded me of these folks; I have seen their work first hand.
MEOB - MEOB
I would imagine there is someone like these two companies in the PNW, and the Furuno folks are typically good at referring, though their Camas shop offers full service too.
MEOB - MEOB
I would imagine there is someone like these two companies in the PNW, and the Furuno folks are typically good at referring, though their Camas shop offers full service too.
- Joined
- Nov 8, 2012
- Messages
- 2,330
- Location
- Port Orchard, WA
- Vessel Name
- Sandpiper
- Vessel Make
- Bluewater 40 Pilothouse Trawler
Can you post a picture of the plug at the monitor?
Some of those older 80's 90's monitors were swappable in the 1830's and 1940's as long as the plugs are identical and were wired the same and power supply is adequate for the array.
Furuno at Camas should answer your question too.
Some of those older 80's 90's monitors were swappable in the 1830's and 1940's as long as the plugs are identical and were wired the same and power supply is adequate for the array.
Furuno at Camas should answer your question too.
Hello, thanks for your useful post. Do you have Chuck´s phone number? Thank you
