Alaskasbear
Veteran Member
- Joined
- Jun 10, 2016
- Messages
- 58
- Location
- United States
- Vessel Name
- Slow Goin
- Vessel Make
- 78 MS 34 Mk1
Sorry for another thread but have another question. Inspecting my new purchase(78 mainship 34 MK1) i discovered that the back wall (sliding glass door) isnt actually atached to the hull where it dips under the railing and follows the hull contour down. It is instead just trimmed out with 1 inch teak. (You can see the trim where it starts right above the couch in the picture) Air gap is about 1 1/2 inches and you can feel cold air coming in. It's like this on both sides and appears like it comes like this from the factory. Is it supposed to be like this? And why? I thought about spraying in foam to help keep the heat in but am thinking it might attract unwanted moisture. Any ideas on this as i must do something (maybe foam backer rod stuffed in). It gets cold on the water here in Alaska and I have never seen anything like this. Ideas, answers anyone? Thank you