GB Parts

[wkearney99]

I can vouch for Kevin being quick to deliver the aft door mortise lock set (handles and all) for my EB47. It fit perfectly. Now I just have to remember not to walk all the way down the dock without my keys!

 

[cks]

Thank you.

 

[Caballero II]

GB parts

All-
I have acquired a huge cache of Grand Banks OEM , NEW, hardware!!

I have butterfly deck hinges, chrome and bronze, original door lock-sets, OEM port starboard nav lights and 1000’s of OEM circuit breakers!!!
Over 1500 linear feet of window track! ALL Grand Banks OEM stuff. New! ( dusty ��)
It’s not yet all categorized. It will take me months to go through but if you send me a message of what you’re looking for I’ll do my best.

I need the Butterly deck hinges in bronze and the "Boarding Bronze Plates", which for some reason my 1982 36' Trawler does not have. Can you help? I don't know how to "PM" off of this list, but hopefully someone can help me out.

 

[firstbase]

Click on the User Name in someone's post and it will pop out a drop down box. Click "Send Private MEssage". On the plates, a couple of years ago there was a fellow who ran a foundry and made them as well as the logo for the cabin side in bronze. He posted here. I got my logos through him and they were very nice. I want to say "Bruce"? Bill"? Not very helpful I know. Search for GB plates and see what you find.

 

[Nordlys]

Kroon locks

When we first got Aquavit (1999 GB 42 MY ) in 2008 the door face plates and handles had corroded beyond repair and I only had one key which the local shop did not have matching blanks. I replaced all the handles and plates through Kroon in Holland. https://www.kroonlocks.com/catalogue
Very helpful and prompt. I know that door hardware sourcing by GB changed over the years so you have to check what you have. My original key was embossed with the name.

 

[Kurplunk]

Hey there!
I’m the guy who posted.
I have original, new GB door hardware.

Kevin, Do you have a remaining inventory list posted somewhere? It's always fun to go shopping!
Steven

 

[cks]

Steven - Not yet.I’m going through stuff now.

 

[doktorglory]

All-
I have acquired a huge cache of Grand Banks OEM , NEW, hardware!!

I have butterfly deck hinges, chrome and bronze, original door lock-sets, OEM port starboard nav lights and 1000’s of OEM circuit breakers!!!
Over 1500 linear feet of window track! ALL Grand Banks OEM stuff. New! ( dusty )
It’s not yet all categorized. It will take me months to go through but if you send me a message of what you’re looking for I’ll do my best.

Hi im looking for a bronze salon door handle . It is the one with the ring on it outside. I would buy two if you have them.

thanks

 

[cks]

I’m sorry, but all my door hardware is either brushed or polished stainless steel.

 

[Croix du Sud]

Hi Cks
Did you get AC/DC panels lights ? Got severe problems with mine on a 1988 GB 36
Otherwise screws to secure flagmasts ´d be welcome
Hope you can help
Jean

 

[cks]

I need a little clarification on “panel lights“
Here’s a pic of what I have.

 

[Cap Steve]

CKS, I’m looking for brushed stainless door hardware still.
Need a cartridge set

 

[cks]

Brushed ss door hardware

Not sure what you referring to re. a cartridge. Attached are some pic of hardware. It would be best to post pics in order to cross match.

 

[Croix du Sud]

AC/DC switches panels lights

Here ´s one of the two mounts I have to replace
Hope you can help
Jean

 

[cks]

I apologize, but I’m confused by your post.
Can you please clarify what you are referring to as mounts?
Are you referring to the plexiglass plate that holds the breakers, etc?

 

[Croix du Sud]

Further details

On the photo, you see a half (upper) chrome silver and half (lower) glass part. It is screwed over a metal bracket holding a festoon bulb
I apologize but I don’t know the accurate term for this device
(This is to enlighten the switches on the AC/DC plexiglas panels)
Read from you
Jean

 

[cks]

I check my stock again. Unfortunately I don’t have this part.

 

[Cap Steve]

Thanks for the photos. The rectangular locks are cartridges or cassettes and it’s what we’re looking for. Will send pictures later.

 

[Cap Steve]

CKS, here’s the photos of our bad lock, plus two of a broken spring on one of our interior locks.
gbmy1271_locks

I can do the needed woodworking to make the lock cartridge work, even if it’s slightly different.
A previous owner used a sawsall to cut the dead bolt without knowing you could disassemble the lock from the interior.
A spring broke within one of the head door knobs and if there aren’t separate springs, I’ll take one of the interior locks to replace the failed one.
Let us know what other info you need and how your would like payment.
Thanks, Steve

 

[cks]

I’m away for the next three weeks aboard Silver Lining. I saved the pics and can try and align with what I have when I get back. ��

 

[Cap Steve]

Enjoy your travels and favorable weather

 

[cmorgan]

Do you have a utility light for the breaker panel?

 

[Chelsea]

Do you have two light switches for my 88 GB?
Thanks,
David

 

[cks]

Hi David,
Yes. I have single & double switches.
Kevin

 

[cks]

Bulb sockets

Per my pm. Bulb sockets.

 

[Croix du Sud]

Hello from France
Still looking for these damn panel lights. Found some with a close look but with no switch, meaning it would be necessary to drill a hole aside to insert a push switch.
I lack one flagmast screw out of two founding no source but purchasing a whole flagmast unit from GB. Well, a most expensive screw…
Further info welcome anyway
Regards
Jean

 

[Chelsea]

GM,

Please email me the cost of the two switches along with mailing to NY, NY Thanks!
david@chelseagardencenter.com

 

[kernr]

TripleNet -

I have had really good luck going directly to GB Malaysia. If they do not have the parts your looking for they will most likely have the original drawings or know the vendor you need to contact. Because they are in the far East you will need to be patient and give them time to respond. here is the person that I contact:

Nazri Abu - nazri_a@grandbanks.com <nazri_a@grandbanks.com>

Hope this helps,
Bob

 

[Cap Steve]

Thank you, I’ll give them a try.

 

[cfm]

you will not find it, been searching for weeks, need to go with 1/4" hollow bulb with hard spline attached. would love to know if you came up with it.
I have also been looking for the round ribbon spring for the Helm and Salon door that attaches to the lever handle.