mrbrzmc2
Member
I know there is a wealth of information here so I think I will tap into it. I have been redoing an '86 42' Hershine. It has two heads with vacuum generators. The one fore works great, the one aft in the master, not so much. The vacuum generator ran constantly so I changed the vacuum switch and all four duck bill valves. Now it makes a couple pumps and throws the breaker. Took it apart, cleaned all the pipes and checked for blockages (YUCK) and pump worked fine chucka chucka. Put back together and couple pumps then throws the breaker again. Any ideas what the problem is? Also, how does one empty these smaller holding tanks into the main holding tank.
Regards and mahalo for any help.
Kevin McClendon
Honolulu
Regards and mahalo for any help.
Kevin McClendon
Honolulu