paulga
Guru
- Joined
- May 28, 2018
- Messages
- 1,341
- Location
- United States
- Vessel Name
- DD
- Vessel Make
- Marine Trader Sundeck 40'
one question about what hose clamp to use.
this is a brass right angle elbow 3/16" Hose ID Barb - 1/4" NPT. What goes on the barb is a 4x10mm fuel hose (hose OD is 10.5mm after fit on the barb)
I wanted to use a 10.5mm constant tension clamp or ABA 10mm stainless clamp, but just noted the band width is 12mm and 9mm, a little longer than the barb length ~7.5mm
what clamp should be used here?
this is a brass right angle elbow 3/16" Hose ID Barb - 1/4" NPT. What goes on the barb is a 4x10mm fuel hose (hose OD is 10.5mm after fit on the barb)
I wanted to use a 10.5mm constant tension clamp or ABA 10mm stainless clamp, but just noted the band width is 12mm and 9mm, a little longer than the barb length ~7.5mm
what clamp should be used here?