Tom.B
Moderator Emeritus
- Joined
- Jul 30, 2009
- Messages
- 5,839
- Location
- USA
- Vessel Name
- Skinny Dippin'
- Vessel Make
- Navigator 4200 Classic
After putting on my CAV spin-on adaptor, I am having trouble finding a 2 micron spin-on filter with M16x1.5 threads. There are lots of 10 micron filters and I have had a 15 micron Luber-Finer LFF3521 on there for the past few months. Problem is its physical size is longer than I would like AND only a 15 micron. So now it's time to change. The cross-reference filters are:
Luber-Finer = LFF3521
Baldwin = BF788
Donaldson = P550440
Fleetguard = FF5052
Fram = P4102A
Wix = 33358
Sierra = 18-7942
I think these are all 10 micron filters. I already have a 30 and 10 micron in the 2-stage filter, so a 2 makes sense, right? Have I screwed myself with the adaptor? Can I just run 30-10-10? Should I do 10-2-10 (as stupid as that sounds) and assume the fuel is already filtered to 30 when it's pumped or polished in my rig?
Luber-Finer = LFF3521
Baldwin = BF788
Donaldson = P550440
Fleetguard = FF5052
Fram = P4102A
Wix = 33358
Sierra = 18-7942
I think these are all 10 micron filters. I already have a 30 and 10 micron in the 2-stage filter, so a 2 makes sense, right? Have I screwed myself with the adaptor? Can I just run 30-10-10? Should I do 10-2-10 (as stupid as that sounds) and assume the fuel is already filtered to 30 when it's pumped or polished in my rig?