HeatherAlyssa
Senior Member
- Joined
- Mar 11, 2017
- Messages
- 217
- Location
- United States
- Vessel Name
- Heather Alyssa
- Vessel Make
- Mainship 350/390
Hello trawler friends! My propeller is off so I’m going to replace my cutless bearing on my 1999 Mainship 350/390. Single engine 1 3/4 “ shaft. Any tips on the removal of the Cutless bearing would be appreciated. I see two set screws on the starboard side. Do I simply remove those, and then drive some kind of punch from forward to aft on the old bearing? Thank you.
Alex
Alex