Gordon J
Guru
- Joined
- Jul 23, 2015
- Messages
- 1,082
- Location
- USA
- Vessel Name
- Didi Mau
- Vessel Make
- Currently looking for next boat
Last June hauled the boat and painted bottom. On way back to Marina I was able to get full rpms and speed or of my twin Cummins 330s. 2800 rpms at 15 knots.
Today I put the boat back in the water after hauling for hurricanes and can get only 2650 - 2700 rpms and 12 knots. Between the two events I disassembled and cleaned racor 1000s. There is some kind odd check ball/valve on the racor. Any chance a mis install could be causing my issue?
Thanks for thoughts suggestions?
Thanks
Gordon
Today I put the boat back in the water after hauling for hurricanes and can get only 2650 - 2700 rpms and 12 knots. Between the two events I disassembled and cleaned racor 1000s. There is some kind odd check ball/valve on the racor. Any chance a mis install could be causing my issue?
Thanks for thoughts suggestions?
Thanks
Gordon