magna 6882
Guru
- Joined
- Apr 20, 2020
- Messages
- 720
- Location
- USA
- Vessel Name
- Intrepid
- Vessel Make
- North Pacific/ NP-45 Hull 10
On my boat the boat side is a 50amp smartplug and the other end has a 30amp 120v for the shore side.
I was struggling to figure out how both sides of the panel was being energized with only one leg of power .
What i discovered today is that both L1 and L2 are connected to the one hot leg on the 30amp. This defies my training in electrical but perhaps its normal in the marine industry.
Thoughts?
I was struggling to figure out how both sides of the panel was being energized with only one leg of power .
What i discovered today is that both L1 and L2 are connected to the one hot leg on the 30amp. This defies my training in electrical but perhaps its normal in the marine industry.
Thoughts?