Shrink Wrap

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

3dog

Veteran Member
Joined
Jul 17, 2012
Messages
51
Location
US
Painting the decks and cabin so I built a frame that allows room to work after shrink wrap.
 

Attachments

  • image-3185551999.jpg
    image-3185551999.jpg
    41.1 KB · Views: 159
  • image-3331633559.jpg
    image-3331633559.jpg
    31.7 KB · Views: 174
Hope you have access to fresh air or you'll get one heck of a buzz in there.

Nice looking Californian!!
 
Hope you have access to fresh air or you'll get one heck of a buzz in there.

Nice looking Californian!!

Put a door in, exhaust fan and most importantly, hired a professional painter.
 
Painters I know say 2 pack paints are "cancer in a can". Ventilate or use a respirator in the enclosed area. Otherwise, the frame is a great idea.
 
Ended up painting under the shrink rap using Perfection and with good results. The next season I painted the flybridge but not under shrink wrap. Had one coat ruined by the weather. Debating about wet sanding as I have a few spots that need attention. Overall I am happy with the results and moving on to the next project.
 
Used a different painter to paint the flybridge and put two finish coats on thicker than I did. More drips and sags than I had but they wet sanded and compounded out nicely. When he went to wet sand the the pilot house that I did he blew through in several spots so he stopped. Compounded the rest and it turned out nicely. He is going to spray another coat or two on the area that went through to the primer and blend. Interlux does not suggest wet sanding so if you use thin coats just compound.
 
Have used the original shrink wrap for two seasons but had a large rip as I did not support it properly from inside the second season. Will patch and use the same frame I used the first season and get another season out of it.
 
Back
Top Bottom