The Brockerts
Senior Member
- Joined
- Oct 17, 2014
- Messages
- 246
- Location
- USA
- Vessel Name
- Moonstruck
- Vessel Make
- 1990 Californian/Carver 48 MY
One of my vacuflushs toilet is plugged up. The puzzle is I have 2 toilets connected to 1 pump/Tank and there is a Y joint connecting them to the pump. One line from Head 1 works just fine but Head 2 is plugged. Given this you have to figure that the plug is between the Y joint and the Toilet otherwse neither would work. Getting ready to disconnect at the Y union I notice what appears to be some standard UNION joints. However they don't look like ones I seen before.
Check out the configuration and pictures below. Before I start disconnecting things I thought I should ask.
Queston : In this kind of vacuflush configuration is there a special UNION joint/part that must be used?
Think there is a duck value in that UNION?
Check out the configuration and pictures below. Before I start disconnecting things I thought I should ask.
Queston : In this kind of vacuflush configuration is there a special UNION joint/part that must be used?
Think there is a duck value in that UNION?