Iggy

I agree with the above. But would be cautious in this. That's why my answer was short. You could back feed the whole boat. I would...

Not understanding you question. What exactly are you trying to do?

Could there be a setting in the camera? Maybe a dip switch? No brand name or model was mentioned.

My thought and I could be wrong. The charger went into a sleep mode since the batteries where fully charged. When the voltage went down...

I never said my setup was in dispute. I am not understanding why your asking the questions that you do. Also playing with my words. I...

As mentioned, If the BMS disconnects the Alt will burn up. Or you must add a protection device and that device is not 100% fool proof...

My ALT is a Balmar with a programable and external regulator. It can be set to flooded, gel, or AGM profiles. Along with other setting...

I get the fading, that's a given. But I rather have the closest thing and than work from there. From the 3 gel coats that I have...

The Timer is built into the Victron DC2DC charger which is set to Li. So no big deal there! Why change the ALT if it is working? In my...

I have a PT40 2001, color tan. I am trying to match the color to fix some nicks from the past owner. But I am having a hard time...

So far this set up has worked for me for the past 2 years. But there is more ways to do this! The first thing I did was to add a heat...

It seems that you have a battery charger (converts AC to DC) running off AC shore power aboard your boat. Most but not all battery...

Was that a light socket?

Maybe time for a taste test???

After checking your gauge with a meter and if both are reading the same. Than I would start at the batteries and take a reading at each...