Transom Door Scupper

[greatlakesmcs]

So on my recently acquired 34 Pilot, the transom door scupper has a broken corner with the pin and so has lost the ability to stay put. Anyone ever run into this and find a replacement? I don’t believe this is an off the shelf part. I can poll my plastic fabricators but if someone already knows who made it, that would be awesome. Thanks in advance!

 

[Sleeping Bear]

Glue it with 5200.

 

[Comodave]

If you can’t get a new one you can probably fix it with some fiberglass on each side. Use epoxy resin as it will stick better. Rough up the plastic to give it some tooth, wipe with acetone and then glass each side with something like 1708.

 

[fgarriso]

What size is it?

 

[Bacchus]

See the "Sticky" in the M-MS section re Parts.
You will have to scan through thumbnail photos to find something that looks similar but that can be easier than scouring the internet.