Interesting boats

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
I think because of the type of boat that it is comparable to.

Some Malahides and Romsdals had twin diesels with one shaft.

Some Romsdals had Detroits with belt drives, IIRC.
AUG 25, 2024
In regard to the Romsdal Trawlers, you are right as to a number of them running twin diesels to a single shaft, the early ones, especially, such as the 65' LOA "Edvard Grieg" class in the mid-1960s. My father was Peter Varney of Newport Beach, California, now deceased. Peter started Romsdal Shipbuilders (US & Norway) in the early 1960s as he had always been impressed by the primary hull design and seagoing capabilities of the Norwegian fishing fleet trawlers, and came to believe there might be a market for their basic oceangoing designs if such craft could be successfully
converted to "yachts" without losing their seriousness of purpose. The "Edvard Grieg" in fact traveled successfully on her own hull from Norway to California through some vicious Atlantic storms. She arrived in Newport Beach with very little damage and so gained some extremely "sales helpful" attention in the maritime press. From that point on the company began to grow, and with increasing sales the notion of larger yachting craft and "expedition" types took hold. I was a 16 year old high school artist when Peter took a chance on me one afternoon and allowed me to propose some varied upper deck supports for the trawlers which wound up in production... a pretty big deal for a kid.

Peter's first experience with serious seagoing began as an officer in the US Merchant Marine officer during WWII while working cargo ships on the North Sea routes from England to Russia and back. Following the war he had a moment's glory acting in films at MGM but determined that boats were more to his liking and so started out in sales by opening "Peter Varney Lido Yacht Sales" in Newport Beach. He would some years later connect with builders in Norway and start the Romsdal line in hopes that others would one day share his belief that the primary design elements of Norwegian commercial trawlers might prove both a handsome and physically successful form for a line of seriously oceangoing yachts.

Any information re Romsdal trawlers or any personal experiences willingly shared on this forum would be greatly welcomed. Patric McMenamin / West Linn, Oregon
 
This is a VSV or very slim vessel spotted in my marina…. A long way from a trawler so apologies for that…
IMG_6595.jpeg
IMG_6596.jpeg
IMG_6598.jpeg
 
Greetings,
Mr. J. NO need to apologize. REALLY neat boat! That's some serious boat porn. Thanks. I'd like to know more about it. Make? Location?
 
I walked by that boat several times a couple of weeks ago. Pretty good looking for its age, and the style is classic. I didn't look too hard though, because of all the exterior teak. You would need to love varnishing.
 
I'm not sure if this has been posted, but I'm interested if anyone has knowledge of this boat. Apparently only a few were made. I wonder how it would handle?

It looks to be in very good condition and seems to be a lot of boat for the money.

Beautiful boat. The hull shape reminds me of a 46 Nordhavn. Great shape for cruising and would be great in following seas. It will be very rolly without stabilizers, especially at anchor. I really like the smart interior. For me, the core material would be the decider for me. For cruising the PNW, you can easily get by without stabilizers. I added a Magma flopper stopper to my previous boat, which really helped slow the roll at anchor and it stows away when not being used.
 
Greetings,
Mr. J. NO need to apologize. REALLY neat boat! That's some serious boat porn. Thanks. I'd like to know more about it. Make? Location?
It’s currently in Portland Marina (Dorset, England)..

VSV 50 – The MCA Coded Superboat!

Key Features

  • Length: 16m (52.5ft)
  • Beam: 2.82m (9.25ft)
  • Draft: 1.0m (3.2ft)
  • Speed: Up to 50 knots (load dependent)
  • Range: 500nm +
  • Displacement: 8250 kg – 10500 kg
  • Construction: Carbon Fibre & Kevlar
  • Base Port: Portsmouth UK
There’s a larger VSV here too…
IMG_6640.jpeg

This one is for sale…
https://www.berthoninternational.com/yacht-sales-brokerage/yachts-for-sale/vsv-maryslim/
 
We passed seized, Russian super yacht ”A” anchored off of Trieste this morning. I think it has to be the ugliest yacht I have ever seen. By far. 143 meters / 469 feet long.
 

Attachments

  • IMG_1043.jpeg
    IMG_1043.jpeg
    77.6 KB · Views: 40
  • IMG_1048.jpeg
    IMG_1048.jpeg
    109.9 KB · Views: 44
I agree that Sailing Yacht A is really unfortunate looking, but Motor Yacht A has grown on me for some reason. Still not what I would order if I could afford it, but more interesting than a lot of other boats.
 
I wonder how the two engines are mated to the shaft? Years ago I looked at a Pop Yachts Ad for a Holiday Mansion houseboat. Single out drive, two original engines, driven by a belt.
 
I think this one looks pretty unique and cool, at a good price point. This would be perfect if you were looking for a super economical option for spending your summers going up to Alaska. Low purchase price, would be cheap to insure, I bet it is relatively fast and sips fuel, and looks easy to maintain.

 

Attachments

  • Screenshot 2024-09-14 at 2.21.14 PM.png
    Screenshot 2024-09-14 at 2.21.14 PM.png
    1,022.8 KB · Views: 46
  • Screenshot 2024-09-14 at 2.21.30 PM.png
    Screenshot 2024-09-14 at 2.21.30 PM.png
    1 MB · Views: 42
  • Screenshot 2024-09-14 at 2.21.52 PM.png
    Screenshot 2024-09-14 at 2.21.52 PM.png
    1 MB · Views: 43
  • Screenshot 2024-09-14 at 2.22.52 PM.png
    Screenshot 2024-09-14 at 2.22.52 PM.png
    1 MB · Views: 38
  • Screenshot 2024-09-14 at 2.22.40 PM.png
    Screenshot 2024-09-14 at 2.22.40 PM.png
    1.1 MB · Views: 35
  • Screenshot 2024-09-14 at 2.22.26 PM.png
    Screenshot 2024-09-14 at 2.22.26 PM.png
    1.2 MB · Views: 41
  • Screenshot 2024-09-14 at 2.22.03 PM.png
    Screenshot 2024-09-14 at 2.22.03 PM.png
    1.1 MB · Views: 41
  • Screenshot 2024-09-14 at 2.23.05 PM.png
    Screenshot 2024-09-14 at 2.23.05 PM.png
    630.1 KB · Views: 47
Last edited:
This 1991 Steber looks amazing. I could even live without the lower helm but, I`m not in the market for another boat and not likely to be. For Aussies, this has to be a very attractive boat which would operate perfectly well at trawler speeds and offer all the benefits of Steber design and construction(subject to Survey of course)
A truly interesting and attractive boat, not badly priced either.
1726557353968.jpeg
 
Another aluminum boat low maintenance.


Oceanvoyager.net twin-engine trawler

Price reduced 200k within the last month!!

Sale due to special circumstance

Unbeatable value

Smaller trades sail or power considered

2021 Ocean Voyager Long Range TARA is a rock-solid expedition yacht, easily managed by two crew, and built for an experienced cruising couple using the following mandates:

· Built for tough conditions

· Self reliant

· High efficiency in all functions

· Low fuel consumption at practical offshore cruising conditions

· Very low maintenance do to durable material choice and system access

· Very well insulated for hot and cold conditions

· Very large area for solar charging system (1600 watts)

· Well insulated engine room for sound reduction

· Practical redundancy with twin engines and electrical systems

· Shallow draft allowing more navigation and anchoring possibilities

· Low windage as practical for less drift and more stability

· Easily maneuvered in marinas, spin in it’s own length

· Inside and outside helm

· Oversize anchor gear

· Comfortable interior for long term living

· Large open back deck for minimum 12’ tender

· Spacious outside seating area doe living and dining

· Easy aft water access

The naval architecture was done by Ulf Rogeberg, and incorporates an extremely efficient sailboat hull form for cruising under power. With twin 150hp diesels that provide a 9 knot cruising speed burning an astonishing 3.5 gallons per hour. (using only about 160hp of the 300 total horsepower available) At eight knots, TARA can cruise non-stop from the Caribbean to New England. In the transition to ecologically conscious yachting, TARA is leading the pack.

The hull and deck are resin infused foam-cored fiberglass, molded by a prestigious New England shipyard, one of the finest composite shipyards in the US. All exterior and interior design and completion was done by Ocean Voyager. TARA’s superstructure is a custom welded aluminum that has been left natural. While there is no such thing as a maintenance-free vessel, TARA is very close to that ideal.

For a short-handed crew or cruising couple, it is worth noting that TARA easily spins in her own length with a powerful thruster and the rudders sited well aft of the center of effort. Comportment around marina docks is far better than most 70+ foot yachts.

TARA’s interior is bright and open, finished off in Herreshoff style with mahogany trim and white panels, Sisal carpets, large windows and white headliners. Headroom is generous throughout. Her exterior offers a very large covered seating /dining area, a 12’ Ternder storage with crane, comfortable water access, and both very spacious lazatette and forcastle

For more information on the builder of Tara, please click here www.oceanvoyager.net
This one is not aluminium boat , it is fiberglass foam cored.
 
Another vessel that caught my eye:

PRIVATEER TRAWLER 50 motor yacht for sale | De Valk Yacht broker

Similar to other Dutch steel boats like the Linssen Grand Sturdy line, but I've never seen them discussed here before (I searched!). They seem to have a layout more like a small trawler than the Linssen boats (e.g., dual helms, galley up, no aft cabin). A few positives that stood out to me: dual helm stations, pilot house doors on port and starboard, dual M1 John Deere engines, CE A rating, can get limbo low enough for the Canal de Midi (3.4 M), has a Seakeeper 9, huge LFP service battery (30,000 Wh), 3 cabins, 2 heads, swim platform, cockpit that can be enclosed, decent sized lazarette, efficient AC/heat systems.

The downsides from my POV: Seakeeper rather than fins; none of the cabins are amazing; cramped engine room (Seakeeper doesn't help); the anchoring tackle seems small for a 33 ton vessel; no solar that I can recall seeing; no clear numbers on fuel efficiency (tankage seems OK, but published consumption numbers don't exist); Privateer Yachts BV seems to no longer exist.

For those who are interested, a video of moving a similar vessel from Southhampton to the south of France:


and discussion of the video:


Cheers,

Jay
3,40m you don't pass the canal du Midi. The theorical smaller bridge is "Marengo" with 3,18 m we pass with few cm gab.
And we was bloked under à higher one in Capestan because at this moment they keep the water 15 cm higher than the référence level....
 
2000 Selene 55 for <700K AUD
Sure its 24 years old and has a single, but hours are good, just looking at it risks half a mongrel.
(AUD buys 66c USD)
Maybe Kit_L`s next boat??
View attachment 156712
Yes an interresting 'smaller' one if we could sold our actual 'to big' Pacific 72' :)
 
Some I looking Just In case we sold our actual :
COLOMBUS was sold in few week STEVENS COLUMBUS KOTTER 16.40 motor yacht for sale | De Valk Yacht broker
OK eed some adaptation for more étendez Cruise
3 near similar actually for sale from 245ke 375ke and this one

This Stentor is interresting ( similar to the Doggerbank we own 24 years ago) but 2x139hp for 50 t...the davantage of this model the alloy hard top is removable for French canal
 
This alloy one but too expensive for us, or if the owner want change with our ?
But not logic our is bigger, younger with 2000h less on engine seam not logic
But à size I like even if too beamy for canal and to much draft for my taste
 
There's certainly a crowd here on the TF which admires these LRC style cruisers. I'm surprised that the owner didn't specify about double the fuel capacity, thus giving it a true Bluewater 3000nm range.
https://www.yachtworld.com/yacht/2021-ocean-voyager-long-range-8794940/
Looking at this one again - I missed it the first time around. Now asking $795k which seems like a very low price for such a boat, but I suppose it's a bit of an odd duck that needs the exact right buyer. Agree with Mako's comment above; listing says 500gal of water, so maybe 1/2 of that could be converted to diesel to at least get over 2000nm.

Another weird choice is that the hydraulic stabilizers are said to be driven by the generator, so it'd have to be running while on passage. Seems odd a vessel with efficiency as the top priority. Still, assuming the design and engineering is sound it looks like a great long range coastal passagemaker.
 
I prefer the original form of the roof

And 2,4 lt engine . I prefer the Cummins 5.9 , Perkins 6lt or John deere.
The welding of the wheelhouse are not Too one, look 'too cold' lot of 'start and stop' and on one photo you can see the métal was not melted..
And don't understand why they cut,and weld the pipe you can bend it it will be nicer.
All that said it is à boat I can like with little less draft ...

Lyman-Morse Boatbuilding - LM 70' Performance Cruiser - Thomaston, Maine
 
Last edited:
ref el paso, i gave it a detailed check and i like the idea of ce a plus french canals but missing get home and only two small doors....after 3 months living on the boat one will hate this restricted in/out....often the things you use 10 times a day will be important......like 8 or 3 steps from salon to cockpit on a sailboat
 
This alloy one but too expensive for us, or if the owner want change with our ?
But not logic our is bigger, younger with 2000h less on engine seam not logic
But à size I like even if too beamy for canal and to much draft for my taste
Teak deck on steel hull and deck, great mistake..
 
Back
Top Bottom