capeshore
Veteran Member
Update from today. Several hours of deck core removal. Combination of a dremel multi tool, air chisel, bars, hammer, drill. Got a good system down and after awhile you've "seen it all" so you just move to the tool needed. It's not fun work but could be worse. Thankfully I think the gunnels are all mush so will be very easy to pull out. I hope the worst is behind me. So far I can say Dremel multi tool for the win.
HEAD: So I tried Bondo body filler for the walls. Will sand and do a second skim type of coat, epoxy prime and paint. So far so good I think. I bought two new port/windows from the same company that made original on the boat. They upgraded the latches thankfully the old screw ones are rough.
I will add that company tomorrow and some pics of them. They are really nice quality etc.
Also SEANAIR, if you read this I Forgot to take the Hull Id down but I will and send over to you. I'm interested as you are to see what yours is as well.
HEAD: So I tried Bondo body filler for the walls. Will sand and do a second skim type of coat, epoxy prime and paint. So far so good I think. I bought two new port/windows from the same company that made original on the boat. They upgraded the latches thankfully the old screw ones are rough.
I will add that company tomorrow and some pics of them. They are really nice quality etc.
Also SEANAIR, if you read this I Forgot to take the Hull Id down but I will and send over to you. I'm interested as you are to see what yours is as well.
Attachments
Last edited: