Anchor pulpit roller
- Thread starter Depot
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
C lectric
Guru
No one yet?
Don't know what you need but you can measure the width of the support and allow approx. 1/8" clearance on the ends.
Then decide what diameter you want, go as big as will fit, and measure the bolt hole diameter of the existing bolt if it fits well.
Don't know what you need but you can measure the width of the support and allow approx. 1/8" clearance on the ends.
Then decide what diameter you want, go as big as will fit, and measure the bolt hole diameter of the existing bolt if it fits well.
Comodave
Moderator Emeritus
- Joined
- Jul 2, 2015
- Messages
- 21,631
- Location
- Au Gres, MI
- Vessel Name
- Black Dog
- Vessel Make
- Formula 41PC
You will have to measure and see what will fit. A quick google and Defender has several different sizes and materials.
Thank you. Done.
