To the dark side
Veteran Member
- Joined
- Jul 21, 2021
- Messages
- 26
- Vessel Make
- Californian 48
I'm in the process of ordering and replacing the old brass faucets and blue sink.
I've read it's a challenge to remove the backsplash 4" tiles from the gelcoat. I have a fein tool. Not sure if that helps. I'm guessing the tiles on the counter are glued directly to the plywood underneath. I can replace the plywood but I worry about damaging the gelcoat. I am going to put in another backsplash if the old comes off and leaves it smooth in behind.
Any thoughts?
I've read it's a challenge to remove the backsplash 4" tiles from the gelcoat. I have a fein tool. Not sure if that helps. I'm guessing the tiles on the counter are glued directly to the plywood underneath. I can replace the plywood but I worry about damaging the gelcoat. I am going to put in another backsplash if the old comes off and leaves it smooth in behind.
Any thoughts?
