aronhk_md
Senior Member
Custom wood coffee/dining/card table. Believe it may be stained oak plywood? Obviously not a cheap piece to build $150
dimensions as coffee table
46"x22" and 20" tall
dimensions raised with top on
65" across 43" deep and 30.5" tall
*note - it is missing one of the 4 wood pegs used to hold it in the raised position. You'll need to make another.
-----------------------------------
-Danforth 35H anchor $250 ($420-$460 new depending where you look)
-250' nylon stranded anchor line/rode with thimble $150 ($328 at west marine)
-Marinco 250v 50A 50' shore power cable $275 (godawful expensive in stores)
If you feel the prices are out of line shoot me an email and tell me what you think.
Thanks
dimensions as coffee table
46"x22" and 20" tall
dimensions raised with top on
65" across 43" deep and 30.5" tall
*note - it is missing one of the 4 wood pegs used to hold it in the raised position. You'll need to make another.
-----------------------------------
-Danforth 35H anchor $250 ($420-$460 new depending where you look)
-250' nylon stranded anchor line/rode with thimble $150 ($328 at west marine)
-Marinco 250v 50A 50' shore power cable $275 (godawful expensive in stores)
If you feel the prices are out of line shoot me an email and tell me what you think.
Thanks
Attachments
-
2014-07-13 14.46.11.jpg134.3 KB · Views: 139
-
2014-07-13 14.47.05.jpg127.4 KB · Views: 131
-
2014-07-13 14.50.14.jpg98.4 KB · Views: 130
-
2014-07-13 14.54.20.jpg130.6 KB · Views: 134
-
2014-07-13 14.56.01.jpg115.3 KB · Views: 128
-
2014-07-13 14.57.54.jpg123 KB · Views: 131
-
2014-07-13 14.58.07.jpg114.6 KB · Views: 125
-
2014-07-13 15.01.55.jpg124.4 KB · Views: 119
-
2014-07-13 15.08.54.jpg137 KB · Views: 132
Last edited: