Does anyone know where to get replacement teak handrail?

[Ronno]

I had the unfortunate accident of having an anchor drag across my stern/starboard teak railing on my 1995 Classic 42...it busted up the rail and bent 2 of the 3 stainless steel uprights on this corner section.

Does anyone have any ideas where I can get some replacements for these (teak rail and the uprights)? I don't need the gates or the gate hardware, but would really like to get authentic parts.

Any ideas out there?

Many thanks,
Ronno

 

[RT Firefly]

Greetings,
Welcome aboard. Unfortunate that it is under such circumstances. A competent welding shop should be able to replicate the bent stanchions particularly since you have one undamaged piece for appropriate dimensions. You may also have to look for a shipwright for the hand rail.

 

[Comodave]

Welcome aboard. Probably will have to have them custom made.

 

[Dawdler]

It's a long shot but you might check with NW Explorations in Bellingham. I think that some of their charter boats have been converted from teak rails to stainless. Perhaps the original teak is in storage somewhere?

 

[Kurplunk]

Does anyone have any ideas where I can get some replacements for these (teak rail and the uprights)? I don't need the gates or the gate hardware, but would really like to get authentic parts.

Ronno,
I know of a 1970's 36' woody that is being parted out. The stantions are available and just may fit. PM me and I will pass along the contact info.

 

[Sformel]

Ronno, I have 2 complete handrail gates, including the hinges and the latch/tongues. These are the bronze alloy hardware. Some time ago I was looking for this hardware and it was impossible to find. Now I have 2 sets for sale. Let me know if you’re interested. Steve

 

[Bud]

Ronno, I have 2 complete handrail gates, including the hinges and the latch/tongues. These are the bronze alloy hardware. Some time ago I was looking for this hardware and it was impossible to find. Now I have 2 sets for sale. Let me know if you’re interested. Steve

I am interested in one set if he does not need both.

Bud

 

[RT Firefly]

Greetings,
Mr./Ms Sf. Welcome aboard.

 

[SteveK]

Thread started 2018, just saying

 

[charmed1751]

I have a Albin 36 and missing part of the gate latch. Mine are 2.5x1.25. Do you sill have that hardware available?

 

[Bud]

Ronno, I have 2 complete handrail gates, including the hinges and the latch/tongues. These are the bronze alloy hardware. Some time ago I was looking for this hardware and it was impossible to find. Now I have 2 sets for sale. Let me know if you’re interested. Steve

Do you still have handrail hardware?

Bud