Who's lost weight!
Hendo's Randall 35 Cray Boat complete rebuild, Perth, Western Australia
- Thread starter Hendo78
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Who's lost weight!
OldDan1943
Guru
- Joined
- Oct 2, 2017
- Messages
- 10,663
- Location
- USA
- Vessel Name
- Kinja
- Vessel Make
- American Tug 34 #116 2008
When you put it in the water, take a crayon or magic marker. once you get the boat level, mark where the water actually sits. Haul it, let the hull dry, level the boat again on blocks, string a chalk line, snap it and begin painting the waterline about one inch or inch and a half above the crayon mark. Put it back into the water, load it up and see where the water mark is. You may have to adjust the water line with the boot top.
Try to be conservative. We dont want you sinking at the dock. LOL
Try to be conservative. We dont want you sinking at the dock. LOL
Last edited:
OldDan1943
Guru
- Joined
- Oct 2, 2017
- Messages
- 10,663
- Location
- USA
- Vessel Name
- Kinja
- Vessel Make
- American Tug 34 #116 2008
Sorry, you are too young to own that boat. LOL
OldDan1943
Guru
- Joined
- Oct 2, 2017
- Messages
- 10,663
- Location
- USA
- Vessel Name
- Kinja
- Vessel Make
- American Tug 34 #116 2008
MATT - Just getting ready to shave aboard SOLSTICE! lol
Ah ha, wife got fed up with you and threw you out of the house? That will motivate you to work faster. LOL
OldDan1943
Guru
- Joined
- Oct 2, 2017
- Messages
- 10,663
- Location
- USA
- Vessel Name
- Kinja
- Vessel Make
- American Tug 34 #116 2008
The AT has a metal arm under tension with a carbon or copper pad riding on the shaft. The arm is tied into the bonding circuit.
I cannot endorse that but, it seems to work.
I cannot remember how the Norhavn shaft was bonded.
Remember to put a zinc on your shaft too.
Haha I’m getting in early. I spent most of my 30’s building this. I’m 40 this year and plan to enjoy using it.
Lou_tribal
Guru
Here you go
L
L
Capecodder
Senior Member
Here you go
L
Same ground on my trawler
OldDan1943
Guru
- Joined
- Oct 2, 2017
- Messages
- 10,663
- Location
- USA
- Vessel Name
- Kinja
- Vessel Make
- American Tug 34 #116 2008
Here you go
L
Same as the American Tug 34. Something happened and I had to replace the propellor. Solution, second zinc on the shaft.
Carried on with the interior works. Did some routering and joinery work this afternoon and of course some sanding. The internal passage doors are now ready for primer and paint so took them downstairs to the painting department lol. Looks like it is almost time to bring the completed helm down to the boat so will do that next week. Very exciting times and I’m sure Flic is happy to get that thing out of the house haha.
Great!!
Capecodder
Senior Member
Well that’s another week done and another step closer to the boat finishing. This afternoon I cracked on and epoxy coated the fwd hatch reveals and the edges of the fwd hatches. Once that was setting up I built the kitchen cabinets for the kitchen. Pretty happy with the size. Not too big as to hinder or make things too tight but still pretty big for a boat of our size. Nice space next to it for a 220L upright fridge to go next to it with a TV on top. Will bring the helm next week and work out the helm seat/cupboard set up. Pretty happy with how it’s turning out.
OldDan1943
Guru
- Joined
- Oct 2, 2017
- Messages
- 10,663
- Location
- USA
- Vessel Name
- Kinja
- Vessel Make
- American Tug 34 #116 2008
I am not now nor have I ever been a carpenter, shipwright nor cabinet maker. In fact, I dont pay any of those on TV either. Permit me to make one observation. Remember you may need access to things between the back of the cabinets, without disassembling the boat. My Nordhavn was a prime example of 'hidden stuff'. The first owner put a 20KW generator in the aft starboard part to the ER. IF anything needed to be repaired outboard of that gen, it would have involved cutting a hole in the hull. There were no organized wire ways.... I cannot tell you how many 'extra wires' I pulled out over the years nor how many pounds of wire ties I pulled out. I think his mind set was, 'Let's add another wire tie to secure the bundle.', without removing the no longer needed wire ties.
On my AT, they used PVC (?) pipe as wire ways, neat and orderly.... fantastic. You may consider cutting panel openings in the back of the cabinets now for access to that mystical dark space between the cabinets and the hull.
ALSO, draw up the wire diagram and a separated piping diagram. Tag the wires at both ends so they can be identified. All those red, black, white, yellow and green wires all look a like. Document, document, document now, while it is easy. You are putting a herculean efforts in your rebuild. This boat will be around long after your 'final voyage' soooooo, make it easy on the next owner(s). Yea yea, we all know, such documentation may not 'follow' the boat beyond the next owner but, you tried. You might consider 2 copies, one for onboard and one at the house. That way, you wont forget and leave it at home. I hope you can draw better than I can. Let's just say, my drawings are rather "artistic" and even with a straight edge there seems to be a wiggle or two in my straight line. (SIGH) We wont go into my 'chicken scratching' labeling.
At one final 'observation'. Just because you have the boat leveled on the blocks does not mean the 'in the water' level will be the same. Dont ask me how I know, please.
NOW, I will go sit in the corner, shut up and continue to be amazed with your effort and skill.
On my AT, they used PVC (?) pipe as wire ways, neat and orderly.... fantastic. You may consider cutting panel openings in the back of the cabinets now for access to that mystical dark space between the cabinets and the hull.
ALSO, draw up the wire diagram and a separated piping diagram. Tag the wires at both ends so they can be identified. All those red, black, white, yellow and green wires all look a like. Document, document, document now, while it is easy. You are putting a herculean efforts in your rebuild. This boat will be around long after your 'final voyage' soooooo, make it easy on the next owner(s). Yea yea, we all know, such documentation may not 'follow' the boat beyond the next owner but, you tried. You might consider 2 copies, one for onboard and one at the house. That way, you wont forget and leave it at home. I hope you can draw better than I can. Let's just say, my drawings are rather "artistic" and even with a straight edge there seems to be a wiggle or two in my straight line. (SIGH) We wont go into my 'chicken scratching' labeling.
At one final 'observation'. Just because you have the boat leveled on the blocks does not mean the 'in the water' level will be the same. Dont ask me how I know, please.
NOW, I will go sit in the corner, shut up and continue to be amazed with your effort and skill.
Last edited:
Thanks for your comment mate.
The only wires in that wall are the 240v wiring running through a pvc pipe to allow replacement.
My auto and marine electrician is drawing up a wiring plan ;-)
The level isn’t being used to check for level mate. It is only being used to ensure that it is running parallel with the floor
Good observation tho mate ;-)
