Marine Trader 36 refurb questions

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

Stefan

Member
Joined
Jul 3, 2024
Messages
7
Location
Chesapeake Bay
Vessel Name
BWNN
Vessel Make
Marine Trader
I’m crossing over from cruising sailboats to a 1990 36ft Marine Trader Sundeck. Much TLC needed to refurb, but basic structures and systems in good shape.

Immediate need for a lock on the starboard sliding cabin door. Needs to be a claw rather than a deadbolt. Here are some pictures with measurements. Any suggestion on sources greatly appreciated.
 

Attachments

  • IMG_20240712_193401633.jpeg
    IMG_20240712_193401633.jpeg
    65.3 KB · Views: 19
  • 20240611_201006_HDR.jpeg
    20240611_201006_HDR.jpeg
    46.3 KB · Views: 16
  • 20240611_201120_HDR.jpeg
    20240611_201120_HDR.jpeg
    61 KB · Views: 17
  • IMG_1648.jpeg
    IMG_1648.jpeg
    338.5 KB · Views: 16
  • 20240611_201100_HDR.jpeg
    20240611_201100_HDR.jpeg
    35.1 KB · Views: 19
Seeing your other post, temporarily can you use a piece of line or a simple hook to lock it from the inside?

There may be some OEM locksets available at all the salvage yards around.

The only one near me is Marine Liquidators of Ft Pierce (more buy out/surplus than salvage) and they do have oddball stuff. Can be very helpful...try and get a picture from someone on here that actually has one in the door. Measurements may be fine though.

The other 2 FL East coast salvage places I have been to are in St Augustine and Ft Lauderdale. Mabe TFers around those can help you out.
 
Whitewater makes one that might work in your situation. I recently had to change one out on my sliding door. Strangely they only make a starboard model.

Here is the link from Amazon

It would take a bit of creative work on your door to make it fit, but that is what was previously done on my 1990 Sabreline so mine was not difficult to change a second time...first one the hole was over cut or what it replaced was larger so I had to epoxy fill in so the screws that hold it in the door had something to bite into.
 
Whitewater makes one that might work in your situation. I recently had to change one out on my sliding door. Strangely they only make a starboard model.

Here is the link from Amazon

Thanks! Looks plausible so I ordered. Returns are easy so I’ll get it in hand and see if I can make it work.

Oddly, this boat only has a starboard door… Well, and a door up some steps that opens on the Sun deck.
 

Latest posts

Back
Top Bottom