Forkliftt
Guru
- Joined
- Oct 6, 2007
- Messages
- 2,450
- Location
- USA
- Vessel Name
- KnotDoneYet
- Vessel Make
- 1983 42' Present Sundeck
I’m not sure that is the right description but let me go on. I have a few areas on the boat, primarily on the hard top supports, that leave a rust colored stain after a hard rain. More recently I see a small crack in the FG/ gelcoat on the side of the steps leading to the fly bridge. It too is oozing the stain out.
I’m certain that the source of the stain is teak beneath the crack that has gotten wet.
I believe these areas are “cold molded” if the is the correct term. I can remove the supports one at a time to repair. There is nothing soft or rotten, just need to reseal maybe? Suggestions?
I’m certain that the source of the stain is teak beneath the crack that has gotten wet.
I believe these areas are “cold molded” if the is the correct term. I can remove the supports one at a time to repair. There is nothing soft or rotten, just need to reseal maybe? Suggestions?