Dave - What are the dimensions of your work boat?
Hendo's Randall 35 Cray Boat complete rebuild, Perth, Western Australia
- Thread starter Hendo78
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Dave - What are the dimensions of your work boat?
- Joined
- Jun 25, 2008
- Messages
- 10,124
- Location
- Australia
- Vessel Name
- Now boatless - sold 6/2018
- Vessel Make
- Had a Clipper (CHB) 34
I agree with psneeld. I used the Squall Blue colour Interdeck on my boat, and it is a one pack poly paint. From what Benn says they might have a two pack epoxy type version as well, but the one pack is great because it does not need a hardener, the non-skid is not too coarse as to be hard on feet etc, is easily cleaned, and easily touched up, and easily applied by roller or brush.
This run of info on deck coatings is really important. I thank all who have had experiences and supply input. I'm sure Matt will benefit from the posts. I too am seeking best "paint-on" deck covering.
IMO, from reading posts, it seems that Inderdeck offers best overall bang for the buck, for reduced efforts and for repairs/recoating.
My eyes and ears are wide open!
IMO, from reading posts, it seems that Inderdeck offers best overall bang for the buck, for reduced efforts and for repairs/recoating.
My eyes and ears are wide open!
psneeld
Guru
here is the Interdeck gray over a not so well prepped teak deck replacement.This run of info on deck coatings is really important. I thank all who have had experiences and supply input. I'm sure Matt will benefit from the posts. I too am seeking best "paint-on" deck covering.
IMO, from reading posts, it seems that Inderdeck offers best overall bang for the buck, for reduced efforts and for repairs/recoating.
My eyes and ears are wide open!
Attachments
I'm just worried it'd be like sandpaper and if you stub ya toe or drag an ankle over it getting up you'll end up needing a skin graph.
I guess I'll need to visually see this interdeck product. I'm definitely not using sand in an epoxy or paint. I've been on decks that had it and it's like being on 40 grit sandpaper. Not what I want.
Sent from my iPhone using Trawler Forum
I guess I'll need to visually see this interdeck product. I'm definitely not using sand in an epoxy or paint. I've been on decks that had it and it's like being on 40 grit sandpaper. Not what I want.
Sent from my iPhone using Trawler Forum
psneeld
Guru
The Interdeck is like 220 grit sandpaper. Enough for traction, but no skin tearing.
If in a slushy environment, I would want more traction, but it has been fine the last 6000 miles. In fact the firstvyear, I never got any down, just the primer and that wasnt even all that slipoery.
Simi 60
Guru
- Joined
- Jul 1, 2016
- Messages
- 5,482
- Location
- Australia
- Vessel Make
- Milkraft 60 converted timber prawn trawler
You have looked at the price of interdeck here right?
It is just paint with beads in it isnt it?
International Interdeck White 1L
$61.95/L
How many litres will you be needing again?
https://www.whitworths.com.au/main_...t4descr=International Interdeck Paint Topcoat
If you already have 20L tins of Jotun, Amercoat or similar which has cost around $10/l why not just put some aside, tint and add your own beads?
It is just paint with beads in it isnt it?
International Interdeck White 1L
$61.95/L
How many litres will you be needing again?
https://www.whitworths.com.au/main_...t4descr=International Interdeck Paint Topcoat
If you already have 20L tins of Jotun, Amercoat or similar which has cost around $10/l why not just put some aside, tint and add your own beads?
Last edited:
Ah ok so it's more of an economical decision not so much that the product is of less quality?
Sent from my iPhone using Trawler Forum
Ah righto ok cool. So it appears I'll need to fair my decks to as this is a "thinnish" paint? Where as the Kiwigrip is a thick acrylic coating.
Sent from my iPhone using Trawler Forum
- Joined
- Jun 25, 2008
- Messages
- 10,124
- Location
- Australia
- Vessel Name
- Now boatless - sold 6/2018
- Vessel Make
- Had a Clipper (CHB) 34
Here's my cockpit finished about 5 years ago with what was the second coat of the Blue Interdeck, and sorry, but I haven't swabbed the deck for quite a while as it's not great weather for boating lately. The surface, if you run fingers over it Matt, would feel about like the skin of a small dogfish. Rough, but not tearing or grazing anything rough...
Attachments
Confusing... tain't it! Know I'm confused which is really the best to use.
I know right. I've used Kiwigrip before and I thought the choice was an easy one but what's thrown me was the amount of interdeck users V Kiwigrip users. I'll have to do some more research and make up my mind. I've got plenty of time up my sleeve so won't be forced to make a rash decision.
Sent from my iPhone using Trawler Forum
- Joined
- Jun 25, 2008
- Messages
- 10,124
- Location
- Australia
- Vessel Name
- Now boatless - sold 6/2018
- Vessel Make
- Had a Clipper (CHB) 34
Easy. Adding a mild detergent if necessary. Heavy rain even brings it up quite well for just dusty grime.
Reading yours and others' recent posts... Kiwigrip has pulled ahead again! I too am in no rush. May the best deck coating winnnnn!!!!
Simi 60
Guru
- Joined
- Jul 1, 2016
- Messages
- 5,482
- Location
- Australia
- Vessel Make
- Milkraft 60 converted timber prawn trawler
If I can buy 1 brand of urethane paint with beads for $61/litre and another brand of urethane paint with beads that does the same job for around $15/litre there are no prizes for guessing which one I would buy.
Of course if someone can show me evidence that it is actually 5X better my thoughts may change.
psneeld
Guru
It may not be 5x better, but after years of mixing beads or sprinkling sand, it is 5x easier even if more expensive.
It also has a flattening agent and a thickening agent, so add those to the cost of many other paints on top of the beads also.
The beauty of it is pop the top, pour it right on the deck if you want and roll it out. One of the easiest paints to use to.
5x better, nope....probably doesn't last as long...but decks take a beating on some boats...and this paint is dead easy to apply and it doesn't look like a touch up as bad as most.
5x easier.... yep....and though pricey...my small decks don't need that much so the ease overcame the money.
Not sure of your pricing...... but here it is only about 2x more expensive. That is if I went with a comprable poly or special deck coatings. But that is IF comparing only being able to buy quart cans at $35 versus other paints up around $80 per gallon.
So it's not for everyone, but it should be a contender.
It also has a flattening agent and a thickening agent, so add those to the cost of many other paints on top of the beads also.
The beauty of it is pop the top, pour it right on the deck if you want and roll it out. One of the easiest paints to use to.
5x better, nope....probably doesn't last as long...but decks take a beating on some boats...and this paint is dead easy to apply and it doesn't look like a touch up as bad as most.
5x easier.... yep....and though pricey...my small decks don't need that much so the ease overcame the money.
Not sure of your pricing...... but here it is only about 2x more expensive. That is if I went with a comprable poly or special deck coatings. But that is IF comparing only being able to buy quart cans at $35 versus other paints up around $80 per gallon.
So it's not for everyone, but it should be a contender.
Last edited:
Thanks for your advice mate. For me; with the amount of time spent and yet to be spent, I'm not going to split hairs and take short cuts with costs because it really isn't a concern, more so quality and longevity.
Maybe I should use both and see. I could use the Kiwigrip on the foredeck cabin roof and the interdeck on the gunnel walkways.
Sent from my iPhone using Trawler Forum
How thick is the layer of paint mate? What's recoating like?
Sent from my iPhone using Trawler Forum
Looks like a test was already done for me.
Art this may be useful for you too brother.
Below link FYI.
http://www.pbo.co.uk/event/beaulieu-boatjumble/deck-paints-test-17514
I'm going to stick with what I know and use Kiwigrip in Grey.
Sent from my iPhone using Trawler Forum
Art this may be useful for you too brother.
Below link FYI.
http://www.pbo.co.uk/event/beaulieu-boatjumble/deck-paints-test-17514
I'm going to stick with what I know and use Kiwigrip in Grey.
Sent from my iPhone using Trawler Forum
Last edited:
CPseudonym
Moderator Emeritus
The devil you know is always better than the one you don't...
Enough of the damn hand wringing over picking paint and let's see the building come back to this boat build thread. Back to your regularly scheduled sanding
Enough of the damn hand wringing over picking paint and let's see the building come back to this boat build thread. Back to your regularly scheduled sanding
The devil you know is always better than the one you don't...
Enough of the damn hand wringing over picking paint and let's see the building come back to this boat build thread. Back to your regularly scheduled sanding
Be nice Craig - LOL
Matt me mate; TY for link... I take a look see
I sent you some other info via PM regarding a top-coat that is not paint - per say. Reason I've not brought forth onto this thread is due to product-use complications I plan to clear up during week or so (you'll see what I mean in the PM). If it tests/seems OK I'll bring results onto a post here. No sense getting everyone in any more of a deck-coat jumble than already exists.
PS: Send Craig photo of some worn sand paper... that might quench his thirst for sanding... for a while anyway! - LOL
IMO - due to this link, and from TF member posts... Kiwigrip currently leads the pack!
Deck paints on test - Practical Boat Owner
Deck paints on test - Practical Boat Owner
The devil you know is always better than the one you don't...
Enough of the damn hand wringing over picking paint and let's see the building come back to this boat build thread. Back to your regularly scheduled sanding
Hahaha can't a brother have a weekend of no sanding..? Haha.
It's Monday now mate. I'll be back at it after work
Sent from my iPhone using Trawler Forum
Matt me mate; TY for link... I take a look see
I sent you some other info via PM regarding a top-coat that is not paint - per say. Reason I've not brought forth onto this thread is due to product-use complications I plan to clear up during week or so (you'll see what I mean in the PM). If it tests/seems OK I'll bring results onto a post here. No sense getting everyone in any more of a deck-coat jumble than already exists.
PS: Send Craig photo of some worn sand paper... that might quench his thirst for sanding... for a while anyway! - LOL
Thanks for the PM mate.
Can't wait to hear back from SK.
Hahaha Worn sandpaper hahaha.
Sent from my iPhone using Trawler Forum
IMO - due to this link, and from TF member posts... Kiwigrip currently leads the pack!
Deck paints on test - Practical Boat Owner
Agreed.
Sent from my iPhone using Trawler Forum
Similar threads
Latest posts
-
-
-
-
Just for fun, how many spare hose clamps do you have onboard?
- Latest: BenSmith1982
-
-
-
-
-
-